Gears and transmission
Motorized Rolling Pin with Frame and Gear Drive
- Bounding box
- 687.0 × 140.0 × 122.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- October 23, 2026
Download
Free to download and use. See the terms.
The prompt
please add frame to move by motor with gear system
Parameters
| Name | Value | Range |
|---|---|---|
| Roller Length | 300 mm | 100 – 500 |
| Roller Diameter | 60 mm | 30 – 120 |
| Grip Diameter | 28 mm | 15 – 50 |
| Grip Length | 90 mm | 30 – 200 |
| Knob Diameter | 38 mm | 20 – 60 |
| Knob Length | 20 mm | 5 – 40 |
| Neck Diameter | 14 mm | 8 – 30 |
| Neck Length | 10 mm | 2 – 30 |
| Bore Diameter | 8 mm | 4 – 20 |
| Fillet Radius | 4 mm | 0.5 – 10 |
| Frame Width (Y) | 120 mm | 60 – 200 |
| Side Plate Thickness | 10 mm | 4 – 20 |
| Base Plate Thickness | 12 mm | 5 – 30 |
| Base Clearance below Roller | 20 mm | 5 – 60 |
| Side Plate Extension above Axis | 30 mm | 10 – 80 |
| Top Beam Height | 12 mm | 5 – 30 |
| Gap Roller End to Side Plate | 5 mm | 1 – 30 |
| Base Margin beyond Parts | 10 mm | 2 – 50 |
| Axle Interference Fit | 0.4 mm | 0.1 – 1 |
| Gear Module | 2 mm | 0.5 – 5 |
| Roller Gear Teeth | 30 teeth | 10 – 80 |
| Pinion Teeth | 10 teeth | 6 – 30 |
| Gear Width | 10 mm | 4 – 30 |
| Gear to Plate Clearance | 2 mm | 1 – 10 |
| Gear Backlash (center distance addition) | 0.2 mm | 0 – 1 |
| Motor Body Diameter | 42 mm | 20 – 100 |
| Motor Body Length | 60 mm | 20 – 150 |
| Motor Shaft Diameter | 5 mm | 2 – 15 |
| Motor Shaft Exposed Length | 25 mm | 5 – 60 |
| Motor Mount Thickness (X) | 12 mm | 4 – 30 |
| Motor Mount Width (Y) | 50 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled