Gears and transmission
Motorized Geared Cycle Lock
- Bounding box
- 90 × 70 × 18 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
I want geared controlled lock for cycle the gear will control by motor and the gear will control a arc link by rack and pinion method,
Parameters
| Name | Value | Range |
|---|---|---|
| Base length | 90 mm | 60 – 120 |
| Base width | 70 mm | 50 – 100 |
| Base thickness | 6 mm | 4 – 10 |
| Corner radius | 6 mm | 2 – 12 |
| Mounting hole diameter | 4.5 mm | 3 – 6 |
| Mounting hole inset | 8 mm | 5 – 15 |
| Pinion teeth | 16 mm | 10 – 24 |
| Gear module | 1 mm | 0.8 – 1.5 |
| Pinion thickness | 6 mm | 4 – 10 |
| Rack pitch radius | 32 mm | 24 – 40 |
| Rack sector angle | 70 deg | 40 – 100 |
| Rack thickness | 6 mm | 4 – 10 |
| Locking pin diameter | 5 mm | 3 – 8 |
| Locking pin length | 10 mm | 6 – 14 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled