Gears and transmission
Motorized Dough Roller with 12-inch Frame
- Bounding box
- 305.4 × 304.8 × 108.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- October 23, 2026
Download
Free to download and use. See the terms.
The prompt
It is not my requirement. Requirement is that a cylinder can move within 12 inches square frame through motor using gears so that dough may be pressed automatically converting into roti (bread). The cylinder shall move on two bars, forward and reverse within distance of 10 inchess. Please modify it.
Parameters
| Name | Value | Range |
|---|---|---|
| Roller Length | 100 mm | 20 – 200 |
| Roller Diameter | 60 mm | 10 – 150 |
| Grip Diameter | 50 mm | 5 – 140 |
| Grip Length | 2 mm | 0 – 50 |
| Knob Diameter | 30 mm | 5 – 80 |
| Knob Length | 2 mm | 0 – 30 |
| Neck Diameter | 20 mm | 5 – 60 |
| Neck Length | 2 mm | 0 – 30 |
| Bore Diameter | 12 mm | 2 – 40 |
| Fillet Radius | 2 mm | 0 – 10 |
| Square Frame Size | 304.8 mm | 150 – 500 |
| Travel Distance | 254 mm | 50 – 400 |
| Frame Width | 30 mm | 10 – 100 |
| Plate Thickness | 6 mm | 2 – 20 |
| Base Thickness | 10 mm | 2 – 30 |
| Base Clearance | 8 mm | 0 – 30 |
| Side Plate Extension | 20 mm | 5 – 60 |
| Top Beam Height | 10 mm | 2 – 30 |
| Plate Gap | 3 mm | 0 – 20 |
| Base Margin / Border Width | 5 mm | 1 – 20 |
| Rail Width | 8 mm | 2 – 30 |
| Rail Height | 10 mm | 2 – 30 |
| Axle Overlap | 2 mm | 0 – 5 |
| Gear Module | 2 mm | 0.5 – 5 |
| Roller Gear Teeth | 30 teeth | 10 – 60 |
| Pinion Teeth | 15 teeth | 8 – 40 |
| Gear Width | 10 mm | 3 – 30 |
| Gear Clearance | 4 mm | 0 – 20 |
| Gear Backlash | 0.2 mm | 0 – 2 |
| Motor Diameter | 40 mm | 10 – 100 |
| Motor Length | 60 mm | 20 – 150 |
| Motor Shaft Diameter | 8 mm | 2 – 20 |
| Motor Shaft Length | 20 mm | 5 – 60 |
| Motor Mount Thickness | 10 mm | 2 – 30 |
| Motor Mount Width | 40 mm | 10 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled