Motorcycle Front Wing Main Wing

I need to design a motorcycle front aerodynamic wing for QJMOTOR SRK921. Please generate an editable CAD model (STEP format preferred) for 3D printing prototyping. Design target: - Single-side motorcycle front wing - Racing style aerodynamic design - Inspired by modern superbike aerodynamic winglets - Generate only the main wing first Dimensions: - Wing length: 220 mm (from motorcycle body outward to wing tip) - Root chord width: 75 mm - Tip chord width: 45 mm - Maximum thickness: approximately 8 mm Geometry requirements: - One-piece single wing design - Wide root section, gradually tapered toward the wing tip - Smooth curved leading edge - Smooth trailing edge - Rounded wing tip transition - Low-profile aggressive racing appearance - Suitable for 3D printing Important: - Create a clean aerodynamic surface - Maintain accurate dimensions - Keep the model editable and parametric if possible - Exportable as STEP or STL Do NOT add: - Motorcycle fairing - Mounting brackets - Motor - Actuator - GPS components - Double wing - Multi-layer wing - Extra winglets - Air ducts Future design consideration: The rear end of the wing will later be modified into an upward 80-degree L-shaped wing tip, but this version should only create the flat main wing surface. Please generate the first CAD concept model only.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.