Brackets and mounts
Motorcycle Fork Clamp with Light Mount
- Bounding box
- 74.0 × 38.1 × 176.9 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple, strong, fully parametric CAD model of a motorcycle fork clamp. Clamp: - Split clamp made of two mirrored halves. - Inner clamp diameter: 54 mm. - Clamp width: about 18–20 mm. - Two M6 bolts connect the halves. - Smooth inner surface without teeth. - Large fillets for strength. Light mount: - Integrate a hollow cylindrical tube on one clamp half. - Tube outside diameter: 33 mm. - Tube length: 60 mm. - Tube wall thickness: 3 mm. - Tube is open at both ends. - Do NOT create any holes in the tube. - Tube axis is perpendicular to the fork tube. Strength: - Add two triangular reinforcing ribs between the clamp and the tube. - Use 4–5 mm fillets on all load-bearing transitions. - Suitable for PETG, ABS or Nylon FDM printing. Output: - Fully parametric solid model. - STEP and STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Clamp Inner Diameter | 54 mm | 40 – 80 |
| Clamp Width | 19 mm | 10 – 40 |
| Wall Thickness | 10 mm | 5 – 20 |
| Tube Outer Diameter | 33 mm | 20 – 50 |
| Tube Length | 60 mm | 30 – 100 |
| Tube Wall Thickness | 3 mm | 1 – 10 |
| Tube Center Z (forward) | 50.2 mm | 35 – 80 |
| Rib Thickness | 5 mm | 2 – 10 |
| Rib Y Offset | 5 mm | 0 – 10 |
| Flange Extension (+X) | 10 mm | 5 – 25 |
| Flange Height (Z) | 20 mm | 10 – 30 |
| Bolt Hole Diameter | 6.5 mm | 3 – 10 |
| Bolt Shaft Diameter | 6 mm | 4 – 10 |
| Bolt Head Diameter | 10 mm | 6 – 16 |
| Bolt Head Height | 4 mm | 2 – 8 |
| Bolt Shaft Length | 20 mm | 10 – 40 |
| Fillet Radius | 5 mm | 0.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent