Loading the interactive model…
Interactive 3D model of Motor with 25-Tooth Spur GearGears and transmission
Motor with 25-Tooth Spur Gear
11 views
- Bounding box
- 60.0 × 60.0 × 84.5 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- August 16, 2026
Download
Free to download and use. See the terms.
The prompt
Add 25 teeth gear on it
Parameters
| Name | Value | Range |
|---|---|---|
| Housing OD | 60 mm | 20 – 200 |
| Housing Length | 50 mm | 10 – 200 |
| Stator OD | 54 mm | 10 – 199 |
| Stator ID | 30 mm | 5 – 199 |
| Stator Length | 30 mm | 5 – 199 |
| Rotor Diameter | 28 mm | 4 – 199 |
| Rotor Length | 26 mm | 4 – 199 |
| Shaft Diameter | 8 mm | 2 – 50 |
| Shaft Length | 80 mm | 20 – 300 |
| Front Cap OD | 60 mm | 20 – 200 |
| Front Cap Thickness | 6 mm | 2 – 30 |
| Rear Cap OD | 60 mm | 20 – 200 |
| Rear Cap Thickness | 6 mm | 2 – 30 |
| Bearing OD | 16 mm | 5 – 100 |
| Bearing Bore | 8 mm | 2 – 50 |
| Bearing Width | 7 mm | 2 – 30 |
| Gear Teeth | 25 teeth | 5 – 100 |
| Gear Module | 2 mm | 0.5 – 10 |
| Gear Face Width | 12 mm | 2 – 50 |
| Gear Pressure Angle | 20 deg | 14 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
Spur Gear (12 Teeth)
Built a gear with 12 teeth
STEPSTLGLB5 PARAMS
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
STEPSTLGLB7 PARAMS