Brackets and mounts
Mosquito Net Hanger - Exploded Hardware Set
- Bounding box
- 1034.5 × 40.0 × 1206.0 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
need you to create the CAD model and engineering drawings for my undergraduate Mechanical Engineering project: “Development of a Mosquito Net Hanger.” I have attached my thesis/project document and the design guide. Use the attached files as the primary source for all dimensions and design details. Do not invent dimensions. Create: Support pole — 1200 mm long aluminium 6063-T6 ABS saddle/bracket with the specified slot and bore Stainless-steel bayonet/cross pin NBR contact pad M6 threaded rod and wing-nut bed clamp Complete assembled model Exploded assembly Dimensioned engineering drawings for the parts and assembly BOM (Bill of Materials) The final design must match the dimensions and mechanism in the attached documents. Important: the final pole length is 1200 mm, not 1800 mm. I need actual CAD/drawing files if you can generate them (STEP, STL, DXF/DWG or equivalent). If you cannot create native CAD files, produce accurate, fully dimensioned engineering drawings that I can use in my thesis. Keep the design mechanically realistic and suitable for fabrication. Do not redesign the concept or add unnecessary features.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 200 mm | 60 – 600 |
| Pole Length (1200 mm per thesis) | 1200 mm | 600 – 2000 |
| Pole Outside Diameter | 25 mm | 15 – 50 |
| Pole Wall Thickness | 1.6 mm | 1 – 5 |
| Saddle Width (X) | 60 mm | 30 – 120 |
| Saddle Depth (Y) | 40 mm | 20 – 100 |
| Saddle Height (Z) | 45 mm | 20 – 120 |
| Pole Socket Clearance | 0.4 mm | 0.1 – 2 |
| Pole Socket Depth | 20 mm | 10 – 60 |
| Net Frame Slot Width | 12 mm | 4 – 40 |
| Net Frame Slot Depth | 18 mm | 5 – 40 |
| Bayonet Bore Diameter | 8 mm | 3 – 20 |
| Bayonet Bore Below Top Face | 9 mm | 3 – 30 |
| Bayonet Pin Diameter | 8 mm | 3 – 20 |
| Bayonet Pin Length | 72 mm | 30 – 160 |
| Pin Head Diameter | 12 mm | 8 – 30 |
| Pin Head Thickness | 5 mm | 2 – 15 |
| R-Clip Hole Diameter | 3 mm | 1 – 8 |
| R-Clip Hole From Free End | 8 mm | 3 – 30 |
| NBR Pad Diameter | 30 mm | 10 – 80 |
| NBR Pad Thickness | 5 mm | 1 – 20 |
| M6 Rod Diameter | 6 mm | 3 – 16 |
| M6 Rod Length | 150 mm | 40 – 400 |
| Wing-Nut Boss Diameter | 12 mm | 6 – 30 |
| Wing-Nut Boss Height | 10 mm | 4 – 30 |
| Wing-Nut Thread Bore | 6 mm | 3 – 16 |
| Wing Length | 18 mm | 6 – 50 |
| Wing Tip Height | 7 mm | 2 – 25 |
| Wing Thickness | 4 mm | 1.5 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu