MORPH-X Chassis Plate

# MORPH-X — Master Chassis CAD Prompt Create a parametric mechanical chassis for a compact autonomous multi-terrain robotic vehicle named MORPH-X. Overall chassis dimensions: 250 mm long, 150 mm wide, and 4 mm thick. Use a rigid rectangular plate with rounded outer corners and a symmetrical left-right layout. Create a 4 mm thick main chassis plate with: * Four 5 mm diameter mounting holes, positioned 15 mm inward from each corner. * A central electronics mounting area measuring approximately 120 mm × 80 mm. * A rectangular battery mounting area measuring approximately 100 mm × 55 mm. * Multiple 4 mm diameter mounting holes arranged symmetrically around the electronics and battery areas. * Front and rear structural mounting zones for the locomotion and morphing mechanisms. * Left and right side mounting rails for attaching wheels, suspension components, or future adaptive-mobility mechanisms. * Cable-routing holes of 8 mm diameter near the electronics area. * Ventilation openings around the electronics mounting region. * 2 mm fillets on external plate edges and 1 mm chamfers around mounting holes. Keep the design fully symmetrical along the longitudinal centerline. Use millimeters for every dimension. Make all major dimensions parametric and editable. The chassis is intended as the primary structural base of MORPH-X and must leave clear mounting space for motors, actuators, sensors, Raspberry Pi, microcontrollers, battery, and communication electronics. Do not add decorative geometry. Prioritize manufacturability, structural simplicity, accessibility for assembly, and future integration of a morphing locomotion mechanism.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.