Monkey Twin Gauge Mount

1 views

Bounding box: 167 × 131 × 13 mm
Engine: 3D Printing B-rep
Parameters: 10
Published: November 8, 2026

Download

Free to download and use. See the terms.

The prompt

// ========================================================= // 仿 Monkey 雙圓儀表座 // 主圓 φ90、小圓 φ60、厚度 13 // ========================================================= $fn = 120; // 參數 main_hole_dia = 90; small_hole_dia = 60; wall_thickness = 3; body_thickness = 13; center_distance = 75; // 主圓外徑 main_outer = main_hole_dia + 2 * wall_thickness; small_outer = small_hole_dia + 2 * wall_thickness; // 主圓環 translate([0, 0, 0]) rotate_extrude() translate([main_outer / 2, 0, 0]) circle(r = main_outer / 2); // 小圓環 translate([center_distance, 0, 0]) rotate_extrude() translate([small_outer / 2, 0, 0]) circle(r = small_outer / 2); // 如果要挖內孔，再用差集 // 這邊可以後續再補布林挖孔

Parameters

Name	Value	Range
Large gauge bore	90 mm	40 – 160
Small gauge bore	60 mm	20 – 140
Gauge centre spacing	80 mm	50 – 160
Material around bores	6 mm	3 – 20
Plate thickness	13 mm	6 – 30
Chamfer on plate edges	1.5 mm	0.5 – 4
Mount tab width	50 mm	30 – 90
Tab end from main centre	80 mm	60 – 140
M5 clearance hole diameter	5.5 mm	3 – 10
Bolt hole spacing	30 mm	16 – 70

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS