Brackets and mounts
Monitor Top Phone Holder Clip
- Bounding box
- 110.0 × 29.5 × 69.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- October 5, 2026
Download
Free to download and use. See the terms.
The prompt
Design a single-piece phone holder that clips onto the top edge of a computer monitor. All dimensions in millimeters. The part is one constant cross-section profile extruded 110 mm along the X axis (monitor width direction), plus one small pocket cut. Cross-section (Y = depth, monitor front at Y=0, monitor back at positive Y; Z = up): 1. Top plate: horizontal, 4 thick, from Y=0 to Y=29.5. Its underside rests on top of the monitor. 2. Front lip: hangs down from the underside of the plate at the front, 3 thick (Y=0 to 3), 6 long. 3. Rear leg: hangs down from the underside of the plate at the back, 3 thick (Y=26.5 to 29.5), 35 long. The clear gap between front lip and rear leg must be exactly 23.5 (the monitor is 23 deep). 4. Phone slot on top of the plate, open at the top and at both X ends: - Front wall: 3 thick (Y=0 to 3), 12 high above the plate. - Slot: 8.2 wide (Y=3 to 11.2). The slot floor is the top of the plate. - Rear wall: 3 thick (Y=11.2 to 14.2), 30 high above the plate. Additional cut: a pocket in the slot floor, 1.5 deep, full slot width (8.2), from X=0 to X=50. This is clearance for the phone's side buttons. Add 1 mm fillets on all outer edges and a 0.5 mm chamfer on the top edges of the slot. The result must be a single watertight solid, printable without supports when laid on its side (cross-section flat on the print bed). Export as STL and STEP.
Parameters
| Name | Value | Range |
|---|---|---|
| Top Plate Thickness | 4 mm | 2 – 10 |
| Front Lip/Wall Thickness | 3 mm | 1 – 10 |
| Monitor Gap | 23.5 mm | 10 – 50 |
| Rear Leg Thickness | 3 mm | 1 – 10 |
| Front Lip Length | 6 mm | 2 – 20 |
| Rear Leg Length | 35 mm | 10 – 60 |
| Front Wall Height | 12 mm | 5 – 30 |
| Slot Width | 8.2 mm | 4 – 20 |
| Rear Wall Thickness | 3 mm | 1 – 10 |
| Rear Wall Height | 30 mm | 10 – 60 |
| Pocket Depth | 1.5 mm | 0.5 – 5 |
| Pocket Length | 50 mm | 10 – 110 |
| Extrusion Length | 110 mm | 50 – 200 |
| Fillet Radius | 1 mm | 0.1 – 3 |
| Chamfer Size | 0.5 mm | 0.1 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu