Brackets and mounts
Modular Solar Roof Tile
- Bounding box
- 420.0 × 354.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- October 5, 2026
Download
Free to download and use. See the terms.
The prompt
Design one modular solar roof tile, 350 × 420 × 40 mm. The PV panel is recessed and flush with the top surface, so the tile itself is the roof structure, not a separate frame. Add a 25 mm air-cooling channel underneath the PV, with inlet and outlet. Add tongue on the left and matching groove on the right for connecting tiles. Add protected male/female PV electrical connectors on opposite sides and mounting points underneath. Make it weatherproof and suitable for connecting multiple tiles.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 420 mm | 300 – 600 |
| Overall width | 350 mm | 250 – 500 |
| Overall height | 40 mm | 30 – 60 |
| PV recess depth | 5 mm | 3 – 10 |
| Recess border X | 15 mm | 5 – 40 |
| Recess border Y | 15 mm | 5 – 40 |
| Cooling channel height | 25 mm | 10 – 30 |
| Channel inset X | 20 mm | 5 – 50 |
| Channel inset Y | 20 mm | 5 – 50 |
| Air slot length | 100 mm | 40 – 200 |
| Air slot width | 30 mm | 10 – 100 |
| Air slot edge inset | 30 mm | 10 – 100 |
| Tongue depth | 10 mm | 5 – 20 |
| Groove depth | 10 mm | 5 – 20 |
| Tongue Y start | 25 mm | 0 – 150 |
| Tongue width Y | 300 mm | 100 – 340 |
| Tongue Z start | 10 mm | 0 – 30 |
| Tongue Z end | 30 mm | 10 – 40 |
| Connector X center | 210 mm | 50 – 370 |
| Connector shroud dia | 20 mm | 10 – 40 |
| Connector shroud depth | 6 mm | 3 – 15 |
| Male pin dia | 6 mm | 2 – 15 |
| Male pin length | 4 mm | 2 – 10 |
| Female socket dia | 6 mm | 2 – 15 |
| Female socket depth | 10 mm | 4 – 20 |
| Mount hole dia | 6 mm | 3 – 12 |
| Mount hole depth | 6 mm | 3 – 10 |
| Mount hole X offset | 20 mm | 5 – 80 |
| Mount hole Y offset | 20 mm | 5 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu