Modular Luggage Transfer Ramp Train (7 Segments)

1 views

Bounding box: 885.7 × 1850.1 × 1222.2 mm
Engine: Precision B-rep
Parameters: 24
Published: October 9, 2026

Download

Free to download and use. See the terms.

The prompt

Scaled Ramp Design Segmentation (Keep in mind that the picture is scaled (1:12.5 cm. Don't scale the inches I include in the description, just the centimeters) (The end of a ramp is the beginning of the curve (banked and normal curve), and the end of the curve meets the beginning of the following ramp. Keep in mind in must be modular) . Seperate the ramp into 7 main parts (The incial drop, the ramp that follows the drop, the curve of 180 degrees, the ramp that follows that curve, the banked curve of 90 degree, the ramp that follows the banked curve, a 90 degree turn connected to the final end ramp) and give an idea of how they could be joined and seperated efficiently. The angle of the inicial drop needs to be 15 degrees and the length of the inicial drop is 2 cm. The whole inicial ramp needs to be physically higher (by about 2 in) than the ramp that follows such that the luggage makes a small drop to a transport car. The ramp that follows the inicial drop starts with a flat part with no angle of length 7 in, then an incline part of angle 20 degrees with length 5 inches. The part that follows the ramp is a curve of 180 degrees directed downward (Make sure the curve can fit a car of dimensions 6.6 inches of length, 3.41 inches of width. . The ramp that follows the curve has an angle of 10 degrees and length of 12 inches. The part that follows will be a banked curve directed downward (keep in mind it fits the cars dimensions). The banked curve should have a banking angle of 6 degrees. The ramp following the curve is of 25 degrees and of length 12 cm. The curve of 90 degrees that follows is connected is directed downwards such that the final end part is 5 degrees of length 5 cm. Overall keep in mind the design is based around luggage of dimensions of 2 inches by 2.99 inches and a car which the luggage will drop into of dimensions 6.6 inches by 3.41 inches. Generte the cad

Parameters

Name	Value	Range
Chute Width	90 mm	40 – 200
Chute Deck Thickness	10 mm	3 – 30
Initial Drop Angle	15 deg	1 – 45
Initial Drop Length	250 mm	50 – 600
Elevation Step to Next Segment	50.8 mm	0 – 150
Flat Section Length	178 mm	0 – 500
Incline Angle	20 deg	0 – 45
Incline Length	127 mm	20 – 500
180 deg Curve Radius	200 mm	100 – 400
180 deg Curve Downhill Pitch	20 deg	0 – 40
180 deg Curve Chord Count	12 pcs	6 – 24
Ramp Angle	10 deg	0 – 40
Ramp Length	305 mm	50 – 800
Banked Curve Radius	200 mm	100 – 400
Banked Curve Downhill Pitch	10 deg	0 – 40
Banking Angle	6 deg	0 – 30
Banked Curve Chord Count	6 pcs	3 – 16
Steep Ramp Angle	25 deg	5 – 45
Steep Ramp Length	1500 mm	200 – 3000
90 deg Turn Radius	200 mm	100 – 400
90 deg Turn Downhill Pitch	5 deg	0 – 30
90 deg Turn Chord Count	6 pcs	3 – 16
Final Ramp Angle	5 deg	0 – 30
Final Ramp Length	625 mm	100 – 1500

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS