Modular Hybrid Laptop Chassis (Mini-ITX + GPU Module)

1 views

Bounding box: 350 × 344.0 × 30 mm
Engine: 3D Printing B-rep
Parameters: 25
Published: October 29, 2026

Download

Free to download and use. See the terms.

The prompt

Add prominent louvered heatsink cooling fins across the entire back surface of the rear module, and apply a sharp 45-degree bevel cut along all outer edges of the main chassis.

Parameters

Name	Value	Range
Width	350 mm	200 – 400
Depth	270 mm	200 – 350
Height	25 mm	15 – 40
Wall thickness	2 mm	1.2 – 4
GPU module depth	60 mm	30 – 100
GPU module height	30 mm	20 – 50
Connector width	80 mm	40 – 150
Connector height	12 mm	6 – 20
Fit clearance	0.3 mm	0.2 – 0.5
Bottom slot length	22 mm	8 – 40
Bottom slot width	4 mm	2 – 8
Bottom slot pitch along X	28 mm	10 – 60
Bottom slot pitch along Y	18 mm	8 – 40
Bottom margin from edges & modular joint	18 mm	5 – 40
Rear slot length (vertical, mm)	8 mm	4 – 24
Rear slot width	3.5 mm	2 – 8
Rear slot pitch along X	20 mm	10 – 60
Rear slot pitch along Z	12 mm	6 – 30
Rear vent margin from edges	8 mm	3 – 20
45-degree chassis edge bevel	3 mm	1 – 10
Number of louvered fins	15 mm	3 – 40
Fin thickness	2 mm	1 – 6
Fin protrusion	12 mm	4 – 30
Louver angle	20 deg	0 – 45
Fin margin from side edges	8 mm	2 – 40

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS