Everything else
Modular Hybrid Laptop Chassis (Mini-ITX + GPU Module)
- Bounding box
- 350 × 330.3 × 30 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
Refine the modular joint interface between the main chassis body and the rear module by adding a clean 0.3mm clearance gap, a subtle interlocking lip edge, and flush alignment lines so they look physically detachable.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 350 mm | 200 – 400 |
| Depth | 270 mm | 200 – 350 |
| Height | 25 mm | 15 – 40 |
| Wall thickness | 2 mm | 1.2 – 4 |
| GPU module depth | 60 mm | 30 – 100 |
| GPU module height | 30 mm | 20 – 50 |
| Connector width | 80 mm | 40 – 150 |
| Connector height | 12 mm | 6 – 20 |
| Fit clearance | 0.3 mm | 0.2 – 0.5 |
| Visible seam gap | 0.3 mm | 0.1 – 1 |
| Interlocking lip thickness | 1.5 mm | 0.8 – 3 |
| Lip overlap into main body | 5 mm | 2 – 10 |
| Lip / notch width | 200 mm | 40 – 340 |
| Alignment line width | 3 mm | 1 – 6 |
| Alignment line depth | 0.6 mm | 0.3 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm