Brackets and mounts
Modular Grid Divider System (Exploded)
- Bounding box
- 130.0 × 100.0 × 18.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
DO NOT redesign this product. Use the uploaded image as the exact reference. The current CAD model is incorrect because the divider panel is being modeled as a flat plate. Instead, create a TRUE VERTICAL DIVIDER WALL. Requirements: - The main part is a vertical divider wall, not a tray, shelf, or flat panel. - The wall stands upright and creates storage compartments when connected to other walls. - Thickness: 2.5–3 mm with reinforcing ribs on the back. - Rounded top edge and rounded corners. - Slide rails integrated into both vertical edges. - Locking groove that engages the connector. The connector must: - Be much smaller than the current cube. - Slide onto the divider rails. - Hide most of the locking mechanism inside. - Use a thumb screw to clamp the divider securely. - Prevent all movement once tightened. - Be used everywhere in the system. Generate: - Divider wall - Universal connector - Thumb screw - Complete 3×3 assembled organizer - Exploded assembly - Connector cross-section showing the internal clamp - Production-ready CAD for injection molding Do NOT create a flat plate, tray, shelf, bin, or box. The final model must closely match the uploaded concept image.
Parameters
| Name | Value | Range |
|---|---|---|
| Divider Height | 100 mm | 50 – 200 |
| Divider Overall Width | 100 mm | 50 – 200 |
| Divider Thickness | 2.8 mm | 2.5 – 3 |
| Rail Width (protrusion) | 5 mm | 3 – 8 |
| Rail Depth (Z) | 3 mm | 2 – 5 |
| T-Slot groove width | 2 mm | 1 – 4 |
| T-Slot groove depth (into rail) | 1.5 mm | 1 – 3 |
| Number of Ribs | 4 | 0 – 10 |
| Rib Thickness | 2 mm | 1 – 3 |
| Rib Depth (Z protrusion) | 3 mm | 2 – 5 |
| Locking Groove Y from bottom | 50 mm | 10 – 90 |
| Groove Depth | 1.5 mm | 1 – 2.5 |
| Connector Height | 20 mm | 15 – 30 |
| Connector Width (X) | 14 mm | 10 – 20 |
| Connector Depth (Z) | 18 mm | 12 – 25 |
| Thumb Screw Diameter | 5 mm | 3 – 8 |
| Screw Length | 15 mm | 10 – 25 |
| Knurl Head Diameter | 12 mm | 10 – 18 |
| Knurl Head Height | 8 mm | 5 – 12 |
| Layout Gap (explode) | 50 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent