Everything else
Modular Desk Organizer Set
- Bounding box
- 652.0 × 100.0 × 95.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- October 15, 2026
Download
Free to download and use. See the terms.
The prompt
create a 3d printable fully modular desk organizer with a base and modules for it . the organizer should be clean and minimal make a connectionsystem between the modules and the base but keep the connections small and minimalistic also create a bunch of different modules and put every module side by side so they dont tutch eachother while printing optimize this model for pla
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 200 mm | 100 – 400 |
| Base Width | 100 mm | 50 – 250 |
| Base Thickness | 4 mm | 2 – 10 |
| Base Corner Radius | 8 mm | 0 – 25 |
| Peg Grid Pitch | 25 mm | 15 – 40 |
| Peg Diameter | 5 mm | 3 – 10 |
| Peg Height | 4 mm | 2 – 8 |
| Socket Depth | 4.5 mm | 2 – 10 |
| Socket Radial Clearance | 0.4 mm | 0.1 – 1 |
| Print Gap Between Parts | 6 mm | 2 – 30 |
| Module Wall Thickness | 2.4 mm | 1.2 – 5 |
| Module Floor Thickness | 6 mm | 3 – 12 |
| Pen Cup Diameter | 45 mm | 30 – 100 |
| Pen Cup Height | 70 mm | 30 – 150 |
| Tray Length (X) | 90 mm | 40 – 200 |
| Tray Width (Y) | 60 mm | 35 – 150 |
| Tray Height | 25 mm | 12 – 80 |
| Phone Stand Depth (X) | 60 mm | 30 – 120 |
| Phone Stand Width (Y) | 60 mm | 35 – 120 |
| Back Wall Height | 85 mm | 40 – 160 |
| Stand Base Thickness | 10 mm | 6 – 30 |
| Front Lip Height | 22 mm | 5 – 60 |
| Parts Bin Length (X) | 90 mm | 40 – 200 |
| Parts Bin Width (Y) | 60 mm | 35 – 150 |
| Parts Bin Height | 32 mm | 12 – 80 |
| Bin Columns (X) | 3 count | 1 – 6 |
| Bin Rows (Y) | 2 count | 1 – 4 |
| Hook Base Plate Size | 50 mm | 35 – 100 |
| Hook Post Height | 70 mm | 30 – 150 |
| Hook Arm Reach | 40 mm | 20 – 100 |
| Cable Comb Length (X) | 60 mm | 30 – 120 |
| Cable Comb Width (Y) | 40 mm | 35 – 80 |
| Cable Comb Height | 22 mm | 12 – 60 |
| Number of Cord Slots | 3 count | 1 – 8 |
| Cord Slot Width | 6 mm | 3 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm