Gears and transmission
Modular Bottle Conveyor Assembly
- Bounding box
- 2059.8 × 240.1 × 974.6 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- August 31, 2026
Download
Free to download and use. See the terms.
The prompt
"Create a 3D parametric CAD model of a modular bottle conveyor assembly. Base frame: rectangular hollow profile 2000mm length, 120mm width, 900mm overall height with 4 support legs and round leveling foot pads. Conveyor bed: 2000mm long by 85mm wide flat top slat channel mounted on top of the frame. Guide rails: two parallel side rails 2000mm long, 60mm tall, spaced 45mm apart centered along the bed. Drive module: cylindrical motor housing 80mm diameter, 120mm length mounted at the end of the bed with 50mm sprockets. Transfer: flat dead-plate transition plate 120mm wide by 50mm long at the conveyor exit."
Parameters
| Name | Value | Range |
|---|---|---|
| Base frame length | 2000 mm | 500 – 3000 |
| Base frame width | 120 mm | 60 – 300 |
| Base frame overall height | 900 mm | 300 – 1500 |
| Frame tube size | 40 mm | 20 – 80 |
| Leveling foot pad diameter | 60 mm | 30 – 120 |
| Foot pad thickness | 25 mm | 10 – 50 |
| Conveyor bed length | 2000 mm | 500 – 3000 |
| Conveyor bed width | 85 mm | 50 – 200 |
| Conveyor bed thickness | 15 mm | 5 – 50 |
| Guide rail length | 2000 mm | 500 – 3000 |
| Guide rail height | 60 mm | 20 – 150 |
| Guide rail thickness | 6 mm | 2 – 20 |
| Guide rail inner spacing | 45 mm | 20 – 100 |
| Drive motor diameter | 80 mm | 40 – 150 |
| Drive motor length | 120 mm | 50 – 300 |
| Sprocket diameter | 50 mm | 20 – 120 |
| Sprocket width | 8 mm | 3 – 25 |
| Number of sprockets | 2 mm | 1 – 4 |
| Transfer plate width | 120 mm | 50 – 250 |
| Transfer plate length | 50 mm | 20 – 150 |
| Transfer plate thickness | 5 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a