Brackets and mounts
Modular Battery Holder with Retaining Bead Clips
- Bounding box
- 60.0 × 30.0 × 21.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 7, 2026
Download
Free to download and use. See the terms.
The prompt
Modular press-fit battery holder designed for 2S 450mAh LiPo batteries. The design features a flat horizontal base plate with vertical, open-faced U-shaped tension clips. The top tips of the vertical arms must feature a smooth inward curve / retaining bead, bowing slightly toward each other to snap over the top edge of the battery for friction retention. Internal width between arms is 14mm with 1.5mm wall thickness. The underside (bottom face) of the base plate must feature an intruding, recessed female dovetail slot cut directly into the base, shifted 2mm to the left of the central axis. No protruding male connectors or side joints.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 60 mm | 30 – 120 |
| Base Width | 30 mm | 20 – 60 |
| Base Thickness | 6 mm | 3 – 15 |
| Clip Height | 15 mm | 8 – 30 |
| Clip Wall Thickness | 1.5 mm | 0.8 – 4 |
| Clip Internal Width | 14 mm | 8 – 25 |
| Clip Count | 2 | 1 – 6 |
| Clip Arm Width | 8 mm | 4 – 20 |
| Lead-in Height | 2 mm | 0.5 – 8 |
| Lead-in Offset | 3 mm | 0.5 – 6 |
| Bead Inset | 1.5 mm | 0 – 4 |
| Bead Height | 5 mm | 1 – 12 |
| Dovetail Width (Open) | 12 mm | 6 – 20 |
| Dovetail Width (Top) | 8 mm | 3 – 15 |
| Dovetail Depth | 3 mm | 1 – 10 |
| Dovetail Y Offset | -2 mm | -10 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent