Loading the interactive model…
Interactive 3D model of 渔船半球形天线罩Everything else
渔船半球形天线罩
1 views
- Bounding box
- 170 × 170 × 93 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
3D 打印一个玻璃纤维半圆天线用于渔船（按天线罩/Radome 建模，含底座、O 形圈密封槽、电缆孔和天线安装柱）
Parameters
| Name | Value | Range |
|---|---|---|
| Dome outer diameter | 130 mm | 80 – 220 |
| Dome curved height | 65 mm | 30 – 110 |
| Straight skirt height | 20 mm | 8 – 60 |
| Dome wall thickness | 3 mm | 2 – 5 |
| Flange and base diameter | 170 mm | 110 – 260 |
| Dome flange thickness | 6 mm | 4 – 10 |
| Base plate thickness | 8 mm | 6 – 14 |
| Cable gland hole diameter | 20.5 mm | 8 – 32 |
| Dome screw bolt circle | 156 mm | 100 – 240 |
| Deck mount bolt circle | 110 mm | 60 – 180 |
| O-ring groove centre diameter | 136 mm | 80 – 220 |
| O-ring groove width | 3.6 mm | 2 – 6 |
| O-ring groove depth | 2.4 mm | 1 – 4 |
| Antenna post square spacing | 50 mm | 20 – 100 |
| Antenna post height | 10 mm | 4 – 40 |
| Antenna post diameter | 9 mm | 6 – 14 |
| Antenna screw pilot diameter | 2.6 mm | 2 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
STEPSTLGLB22 PARAMS
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
STEPSTLGLB20 PARAMS
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm
STEPSTLGLB4 PARAMS
Aerodynamic Drone Propeller
i wante more aerodynamic
STEPSTLGLB12 PARAMS