Everything else
自定心棘轮夹具壳体底座
- Bounding box
- 140.0 × 70.0 × 42.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- September 17, 2026
Download
Free to download and use. See the terms.
The prompt
⚙️装配约束（3D 装配环境需要施加） 左、右夹持臂：与壳体底座滑槽【滑动约束】，只能沿水平开合方向移动，其余自由度全部限制； 同步齿轮：绕不锈钢转轴【旋转约束】；分别与左齿条、右齿条【齿轮啮合】；实现左右臂同步对中； 棘轮齿盘：与同步齿轮同轴固定（随齿轮一起转动）； 棘爪滑块：壳体内部导向滑动；小压簧施加预压力，使棘爪始终压向棘轮齿面； 解锁拨钮：【滑动约束】，拨钮下压接触棘爪滑块，推动棘爪抬离棘轮齿，解除自锁； 主压缩弹簧：两端分别抵靠壳体与夹持臂，持续输出向内夹紧力。
Parameters
| Name | Value | Range |
|---|---|---|
| 壳体总长 X | 140 mm | 90 – 220 |
| 壳体总宽 Y | 70 mm | 46 – 120 |
| 底板厚 | 18 mm | 10 – 32 |
| 端块高（底板上） | 24 mm | 14 – 44 |
| 端块长度（导向段） | 40 mm | 20 – 65 |
| 外形圆角 | 4 mm | 0.5 – 8 |
| 夹持臂滑槽宽（Y） | 12 mm | 6 – 24 |
| 夹持臂滑槽高（Z） | 14 mm | 6 – 26 |
| 滑槽中心距转轴距离 | 20 mm | 10 – 40 |
| 滑槽底面高度 Z | 22 mm | 8 – 40 |
| 不锈钢转轴孔径 | 8 mm | 4 – 20 |
| 转轴轴承凸台直径 | 22 mm | 12 – 40 |
| 轴承凸台高 | 6 mm | 0 – 16 |
| 棘爪滑块导槽宽（Y） | 10 mm | 5 – 20 |
| 棘爪滑块导槽高（Z） | 10 mm | 5 – 20 |
| 棘爪导槽底面高度 Z | 22 mm | 8 – 40 |
| 棘爪导槽长度（盲槽） | 30 mm | 12 – 50 |
| 小压簧孔径 | 6 mm | 3 – 12 |
| 小压簧孔深 | 10 mm | 3 – 20 |
| 解锁拨钮导槽长（X） | 12 mm | 6 – 24 |
| 解锁拨钮导槽宽（Y） | 10 mm | 5 – 20 |
| 主压簧座直径 | 14 mm | 8 – 26 |
| 主压簧座深度 | 14 mm | 4 – 30 |
| 安装孔直径 | 4.5 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm
Aerodynamic Drone Propeller
i wante more aerodynamic