Mobile X-ray Prototype (Tube over Collimator)

**scaled-down mobile X-ray machine prototype** dimensions  - **Main body:** 305 × 210 × 300 mm - **Main wheels:** Ø120 × 22 mm - **Front caster wheels:** Ø50 × 18 mm - **Vertical column:** 60 × 60 × 380 mm - **Horizontal arm:** 240 × 40 × 40 mm - **X-ray tube housing:** 100 × 85 × 90 mm - **Collimator:** 80 × 70 × 40 mm - **Handle:** 180 × 20 mm - **Control panel:** 100 × 70 × 20 mm ### Important X-ray tube arrangement The **horizontal arm extends from the vertical column and supports the X-ray tube housing at its far end**. The **X-ray tube housing must be positioned above the collimator**, with the collimator **directly attached to the bottom/front of the tube housing**. The **collimator must point vertically downward toward the patient/table**, as in a conventional mobile radiography system. Do **not** place the tube housing and collimator side-by-side or at an incorrect angle. The tube assembly should look like: **Horizontal arm → Tube housing → Collimator → downward X-ray beam direction** Include a realistic tube mounting bracket and pivot/rotation joint between the arm and tube housing. ### Mechanical structure - Vertical sliding carriage for the arm - Arm pivot and locking mechanism - Realistic wheel brackets and caster assemblies - Cable routing along the arm and column - Handle at the rear/upper part of the body - Control panel on the main body - Rounded medical-equipment enclosure

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.