Enclosures and housings
Mobile Gaming Grip for Pixel 8 Pro
- Bounding box
- 288.2 × 80.1 × 32.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a one-piece, 3D-printable mobile gaming grip for a caseless Google Pixel 8 Pro, similar to the Y-Pad mobile controller. Hold the 162.6 × 76.5 × 8.8 mm phone horizontally above two rounded, ergonomic controller-style handles. Use 0.4 mm phone clearance, 2.4 mm minimum walls, and small rounded retaining lips that overlap the front by no more than 1.5 mm. Leave the back substantially open with a centered 115 × 64 mm rounded rectangular opening so an external phone cooler can directly contact the rear glass. Keep the entire camera-bar area open with at least 28 mm clearance from the phone’s left end. Keep the right-side USB-C port, speakers, and upper-edge power and volume buttons accessible. Use recessed areas for 1 mm TPU pads at the phone-contact points. Make the grips approximately 32 mm thick with smooth palm-filling curves and rounded edges. Do not include electronics, joysticks, buttons, a built-in fan, logos, or a solid back panel.
Parameters
| Name | Value | Range |
|---|---|---|
| Phone Length | 162.6 mm | 150 – 180 |
| Phone Width | 76.5 mm | 70 – 85 |
| Phone Thickness | 8.8 mm | 7 – 12 |
| Phone Clearance | 0.4 mm | 0.2 – 1 |
| Wall Thickness | 2.4 mm | 1.5 – 4 |
| Lip Overlap | 1.5 mm | 0.5 – 2 |
| Grip Thickness | 32 mm | 25 – 40 |
| Grip Length | 90 mm | 70 – 120 |
| Grip Width | 40 mm | 30 – 50 |
| Cooler Opening Length | 115 mm | 100 – 130 |
| Cooler Opening Width | 64 mm | 50 – 70 |
| Camera Clearance from Left | 28 mm | 20 – 40 |
| TPU Pad Depth | 1 mm | 0.5 – 2 |
| Fillet Radius | 5 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w