Enclosures and housings
Mitutoyo Digimatic 10-Pin Connector Plug
- Bounding box
- 10.0 × 25.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D model of a single Mitutoyo Digimatic 10-pin male connector plug housing. Outer dimensions must be exactly: 10mm width, 4mm height, and 15mm length. The front face must be completely solid, closed, and flat. On the bottom surface of the connector, create 10 parallel open rectangular slots/grooves for the spring contact pins. These 10 bottom grooves must run longitudinally from front to back, with a pitch spacing of 1.6mm between each groove. The back side of the connector must have a single round hole with a 4.0mm diameter for the cable entry. The entire model must be a single solid manifold object, water-tight, and ready for 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Plug Width | 10 mm | 5 – 20 |
| Plug Height | 4 mm | 2 – 10 |
| Plug Length | 15 mm | 8 – 30 |
| Pin Pitch | 1.6 mm | 0.8 – 3 |
| Pin Count | 10 | 2 – 20 |
| Slot Width | 0.8 mm | 0.3 – 2 |
| Slot Depth | 1 mm | 0.3 – 2 |
| Wall Thickness | 1 mm | 0.5 – 2 |
| Sleeve Length | 10 mm | 5 – 25 |
| Sleeve Bore Diameter | 4 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w