Enclosures and housings
Mitutoyo 10-Pin Plug Housing
- Bounding box
- 10.0 × 6.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 7, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a high-precision 3D mechanical model of a single Mitutoyo Digimatic 10-pin male plug housing for 3D printing. Main body is a solid rectangular prism with global dimensions: Width (X-axis) = 10.0mm, Height (Z-axis) = 4.0mm, Length (Y-axis) = 15.0mm. The front face (Y-max) must be 100% solid, flat, and closed. On the BOTTOM surface (Z-min), cut 10 parallel open longitudinal grooves/slots for spring contact pins running from front to back along the Y-axis. Each groove dimension: width = 0.6mm, depth = 1.5mm. The spacing (pitch) between the centerlines of each groove must be exactly 1.6mm, perfectly centered on the X-axis. At the rear face (Y-min), subtract a horizontal cylindrical bore hole with a diameter of 4.0mm and depth of 5.0mm to act as a cable wire entry point. Ensure the final geometry is a single watertight, manifold solid mesh with sharp corners and no stray artifacts.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Width (X) | 10 mm | 5 – 20 |
| Housing Height (Y) | 4 mm | 2 – 10 |
| Housing Length (Z) | 15 mm | 8 – 30 |
| Number of Grooves | 10 | 2 – 20 |
| Groove Pitch | 1.6 mm | 0.5 – 5 |
| Groove Width | 0.6 mm | 0.2 – 2 |
| Groove Depth | 1.5 mm | 0.2 – 3 |
| Front Wall Thickness | 1 mm | 0.2 – 3 |
| Rear Wall Thickness | 1 mm | 0.2 – 3 |
| Bore Diameter | 4 mm | 1 – 8 |
| Bore Depth (inside housing) | 5 mm | 1 – 10 |
| Sleeve Outer Diameter | 6 mm | 2 – 10 |
| Sleeve Length (rear extension) | 5 mm | 0 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w