Enclosures and housings
Mitutoyo 10-Pin Connector Housing
- Bounding box
- 10.0 × 25.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- September 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D model of a rectangular Mitutoyo Digimatic 10-pin male connector housing for 3D printing. The outer connector plug section must have precise dimensions: width of 10.0mm, height of 4.0mm, and length of 15.0mm. Inside, create a hollow guide space for 10 spring contact pins with a pitch spacing of 1.6mm between pins. The back of the housing should taper into a round cable relief sleeve with a 4.0mm bore hole for the data wire. Ensure the model is watertight, manifold, and ready to export as an STL file for 3D printing
Parameters
| Name | Value | Range |
|---|---|---|
| Plug Width | 10 mm | 8 – 20 |
| Plug Height | 4 mm | 3 – 10 |
| Plug Length | 15 mm | 10 – 30 |
| Pin Pitch | 1.6 mm | 1 – 3 |
| Pin Count | 10 | 2 – 20 |
| Pin Hole Diameter | 0.8 mm | 0.5 – 2 |
| Wall Thickness | 1.2 mm | 0.8 – 3 |
| Sleeve Length | 10 mm | 5 – 30 |
| Sleeve Bore Diameter | 4 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w