Brackets and mounts
MiniGuardião Rounded Wearable Enclosure
- Bounding box
- 51.0 × 41.0 × 14.9 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- September 25, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing MiniGuardião enclosure. Make the enclosure much more rounded and compact, NOT boxy or square. Use a soft rounded-square / rounded-oval shape similar to a small wearable electronic device. The four corners must have large smooth radii, with continuous curved transitions between the top, sides and bottom. Avoid sharp 90-degree corners and avoid the appearance of a small rectangular box. Keep the existing functional features: * removable top cover; * hollow internal compartment; * USB-C charging opening on the side; * ON/OFF button opening; * small LED status opening; * internal mounting space for the electronics. Keep approximately the same overall size, but make the external shape noticeably more ergonomic, smooth and rounded. The final enclosure should look like a compact wearable device housing, not a square electronics box.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length (X) | 50 mm | 30 – 80 |
| Outer Width (Y) | 40 mm | 25 – 70 |
| Shell Height | 12 mm | 6 – 30 |
| Wall Thickness | 2 mm | 1.2 – 4 |
| Corner Radius (rounded-square) | 14 mm | 3 – 18 |
| Bottom Edge Round-Over | 4.5 mm | 0 – 10 |
| Cover Cap Thickness | 3 mm | 1 – 8 |
| Cover Top Round-Over | 1.6 mm | 0.2 – 5 |
| Cover Overhang | 0.5 mm | 0 – 2 |
| Snap Lip Height | 2.5 mm | 0.5 – 6 |
| Snap Lip Thickness | 1.5 mm | 0.8 – 3 |
| Lip Clearance | 0.4 mm | 0.1 – 1 |
| USB-C Opening Width | 9 mm | 4 – 16 |
| USB-C Opening Height | 3.5 mm | 2 – 8 |
| USB-C Opening Height (Z) | 8 mm | 3 – 14 |
| ON/OFF Button Hole Dia | 3.5 mm | 1 – 8 |
| Button Hole Height (Z) | 8 mm | 3 – 14 |
| LED Status Hole Dia | 3 mm | 1 – 6 |
| Mounting Post Dia | 4 mm | 2 – 8 |
| Mounting Post Height | 6 mm | 2 – 12 |
| Post Gap to Wall | 1 mm | 0.3 – 5 |
| Post Pilot Hole Dia | 1.8 mm | 0.8 – 4 |
| Post Pilot Hole Depth | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu