Mini Sumo Robot Chassis (Base + 4 Walls)

1 views

Bounding box: 100.0 × 115.0 × 73.0 mm
Engine: Precision B-rep
Parameters: 27
Published: September 19, 2026

Download

Free to download and use. See the terms.

The prompt

Chasis de robot Mini Sumo (10x10 cm máx, 500g), 4 piezas en placa de 4-5mm de espesor, tipo caja abierta: base + frontal + 2 laterales + trasera. BASE: 100x100mm, con 2 cajas rectangulares de 12x12mm (separadas 9mm entre sí) para sensores TCRT5000 orientados hacia abajo. FRONTAL: ancho 100mm, corte rectangular centrado arriba (15x6mm aprox, paso de cable). 3 soportes para sensores E18-D80NK (cilíndricos, rosca M18): 2 torretas laterales simétricas de 25mm ancho x 30mm alto, y 1 torreta central escalonada (10x5mm base, 4x9mm superior) para orificio de 18mm de diámetro. LATERAL (x2, idénticas): 60mm ancho x 68mm alto, con esquina inferior recortada en curva suave (tipo cuarto de círculo). 1 orificio circular de 18mm diámetro para sensor E18-D80NK, más 1 ranura ovalada de 10mm ancho x 7mm alto cerca del borde inferior (montaje/cableado). TRASERA: placa plana rectangular, ancho 100mm, sin orificios. Ensamblaje tipo caja: base + 4 paredes atornilladas/encajadas en escuadra.

Parameters

Name	Value	Range
Base Width (X)	100 mm	60 – 150
Base Depth (Y)	100 mm	60 – 150
Plate Thickness	5 mm	3 – 8
TCRT5000 Cutout Size	12 mm	6 – 20
Gap Between Sensor Cutouts	9 mm	2 – 30
Sensor Cutout Centre From Front	20 mm	12 – 50
Wall Height	68 mm	30 – 100
Side Wall Length	60 mm	30 – 100
Lower-Front Corner Radius	20 mm	0 – 30
Cable Pass Width	15 mm	5 – 40
Cable Pass Height	6 mm	3 – 20
Cable Pass Gap Below Top Edge	5 mm	1 – 20
Side Tower Width	25 mm	20 – 40
Side Tower Height	30 mm	25 – 50
Side Tower Centre From Edge	20 mm	14 – 40
Centre Tower Lower Step Width	28 mm	22 – 45
Centre Tower Lower Step Height	12 mm	4 – 30
Centre Tower Upper Step Width	24 mm	20 – 40
Centre Tower Upper Step Height	20 mm	10 – 45
Sensor Tower Depth	15 mm	8 – 30
E18-D80NK Hole Diameter	18 mm	10 – 24
Side Sensor Hole From Front	22 mm	12 – 55
Side Sensor Hole Above Base	45 mm	25 – 65
Oval Slot Width	10 mm	4 – 20
Oval Slot Height	7 mm	3 – 15
Oval Slot From Front	22 mm	12 – 55
Oval Slot Above Base	10 mm	6 – 25

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS