Everything else
Mid-Engine Tube Chassis with Suspension and Steering
- Bounding box
- 1460.0 × 3085.0 × 1181.4 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- October 11, 2026
Download
Free to download and use. See the terms.
The prompt
Generate me a double wishbone suspension connected to a skoda fabia 3 brake rotor etc and generate me a mid engine style tube chasis, which has RWD and working steering. the suspension should also be working. the whole car chasis should look like a basic caterham or something like that but with a roof
Parameters
| Name | Value | Range |
|---|---|---|
| Wheelbase | 2400 mm | 1800 – 3500 |
| Track Width | 1400 mm | 1000 – 1800 |
| Tube Diameter | 40 mm | 20 – 60 |
| Lower Rail Half-Width | 450 mm | 300 – 600 |
| Upper Rail Half-Width | 400 mm | 250 – 600 |
| Roof Rail Half-Width | 300 mm | 150 – 500 |
| Lower Rail Height | 250 mm | 150 – 400 |
| Upper Rail Height | 800 mm | 600 – 1100 |
| Roof Height | 1300 mm | 1000 – 1600 |
| Cockpit Front Offset | 500 mm | 300 – 800 |
| Cockpit Rear Offset | 500 mm | 300 – 800 |
| Wheel Radius | 300 mm | 250 – 400 |
| Lower Wishbone Tube Radius | 12 mm | 6 – 25 |
| Upper Wishbone Tube Radius | 10 mm | 5 – 20 |
| Hub/Upright Radius | 30 mm | 15 – 50 |
| Brake Rotor Diameter | 260 mm | 200 – 350 |
| Brake Rotor Thickness | 22 mm | 10 – 35 |
| Brake Caliper Width | 50 mm | 30 – 80 |
| Steering Rack Forward Offset | 350 mm | 200 – 500 |
| Steering Rack Height | 350 mm | 200 – 600 |
| Steering Rack Diameter | 30 mm | 20 – 50 |
| Tie Rod Radius | 8 mm | 4 – 15 |
| Steering Arm Y Offset | 120 mm | 80 – 200 |
| Engine Block Width (Across Car) | 400 mm | 250 – 600 |
| Engine Block Length (Fore-Aft) | 500 mm | 300 – 800 |
| Engine Block Height | 300 mm | 150 – 500 |
| Driveshaft Radius | 20 mm | 10 – 35 |
| Transaxle Width | 400 mm | 200 – 600 |
| Transaxle Length | 300 mm | 150 – 500 |
| Transaxle Height | 250 mm | 100 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm