Gears and transmission
MG996R Load-Bearing Turntable Disc (25T Spline)
- Bounding box
- 44.0 × 44.0 × 13.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- October 18, 2026
Download
Free to download and use. See the terms.
The prompt
A 3D mechanical diagram of a load-bearing turntable disc designed for an MG996R servo shaft with a 25T standard spline and a 5.9 mm shaft diameter. The design features an outer platter with a distance of 4.5 mm from the outer edge to the center gear hole, incorporating an integrated weight-bearing mechanism to protect the servo motor.
Parameters
| Name | Value | Range |
|---|---|---|
| Platter Diameter | 44 mm | 20 – 120 |
| Platter Thickness | 9 mm | 4 – 25 |
| Outer Edge Rim Width | 4.5 mm | 1 – 15 |
| Rim Lip Height | 1.5 mm | 0.2 – 8 |
| Centre Hub Diameter | 16 mm | 8 – 40 |
| Centre Hub Height | 4 mm | 1 – 20 |
| Spline Tooth Count | 25 teeth | 10 – 40 |
| Spline Major Diameter | 5.9 mm | 3 – 15 |
| Spline Root Diameter | 4.9 mm | 2 – 14 |
| Spline Socket Depth | 4.5 mm | 1 – 15 |
| Shaft Clearance Bore | 6.2 mm | 3 – 20 |
| Thrust Bearing Pocket OD | 19 mm | 8 – 60 |
| Thrust Bearing Pocket Depth | 5 mm | 1 – 15 |
| Payload Hole Diameter | 3.2 mm | 1 – 10 |
| Payload Bolt Circle | 30 mm | 10 – 100 |
| Payload Hole Count | 4 holes | 0 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled