Gears and transmission
Meshing Spur Gear Pair m1.5 z20
- Bounding box
- 63.0 × 33 × 8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Parameter Gear 1 Gear 2 Gear type Spur Spur Number of teeth 20 20 Module 1.5 1.5 Pressure angle 20° 20° Thickness 8 mm 8 mm Bore diameter 6 mm 11 mm Pitch diameter 30 mm 30 mm Outside diameter 33 mm 33 mm Gear ratio 1:1 1:1 Parameter Gear 1 Gear 2 Gear type Spur Spur Number of teeth 20 20 Module 1.5 1.5 Pressure angle 20° 20° Thickness 8 mm 8 mm Bore diameter 6 mm 11 mm Pitch diameter 30 mm 30 mm Outside diameter 33 mm 33 mm Gear ratio 1:1 1:1
Parameters
| Name | Value | Range |
|---|---|---|
| Gear module | 1.5 mm | 0.5 – 5 |
| Pressure angle | 20 deg | 14.5 – 30 |
| Face width / thickness | 8 mm | 3 – 30 |
| Gear 1 tooth count | 20 mm | 8 – 60 |
| Gear 1 bore diameter | 6 mm | 2 – 25 |
| Gear 2 tooth count | 20 mm | 8 – 60 |
| Gear 2 bore diameter | 11 mm | 2 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled