Brackets and mounts
Mesh Launcher Assembly
- Bounding box
- 420.6 × 400.1 × 310.1 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a housing with a rotating mechanism for mounting on a vehicle roof; the unit will contain a battery, a motor with a control board, and a feed system for mesh cartridges—a robotic mesh launcher designed to counter FPV drones.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing OD | 400 mm | 200 – 600 |
| Housing Height | 300 mm | 200 – 500 |
| Wall Thickness | 5 mm | 2 – 20 |
| Top Opening Dia | 250 mm | 50 – 350 |
| Vent Slot Length | 100 mm | 20 – 200 |
| Vent Slot Width | 10 mm | 5 – 30 |
| Number of Vent Slots | 6 | 2 – 12 |
| Ejection Opening Width | 200 mm | 100 – 350 |
| Ejection Opening Height | 80 mm | 40 – 150 |
| Bracket Length | 300 mm | 200 – 500 |
| Bracket Width | 200 mm | 150 – 400 |
| Bracket Thickness | 10 mm | 5 – 20 |
| Bracket Hole Dia | 10 mm | 5 – 20 |
| Hole Spacing X | 250 mm | 100 – 450 |
| Hole Spacing Y | 150 mm | 100 – 350 |
| Rotating Mech Dia | 200 mm | 100 – 300 |
| Rotating Mech Height | 40 mm | 20 – 80 |
| Gear Module | 2 mm | 1 – 5 |
| Gear Teeth | 20 | 10 – 50 |
| Gear Bore Dia | 8 mm | 5 – 20 |
| Battery Length | 150 mm | 100 – 250 |
| Battery Width | 100 mm | 60 – 150 |
| Battery Height | 50 mm | 30 – 80 |
| Motor Diameter | 60 mm | 30 – 100 |
| Motor Length | 80 mm | 40 – 150 |
| PCB Length | 100 mm | 60 – 200 |
| PCB Width | 80 mm | 40 – 150 |
| PCB Thickness | 20 mm | 10 – 40 |
| Magazine Length | 250 mm | 150 – 400 |
| Magazine Width | 150 mm | 100 – 250 |
| Magazine Height | 100 mm | 60 – 150 |
| Feed Wall Thick | 3 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu