Everything else
Mesa V3 Snap-On Carry Handle
- Bounding box
- 34.0 × 280.0 × 199.3 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
I want to make a handle that attaches to an Uppababy v3 Mesa carseat in the stroller attachment Heres an example of how it is held: https://www.instagram.com/reels/Ca5jnNGgqa4/ Here is the manual of the product: https://back.uppababy.com/media/92/e3/cc/1767710027/CA_1003-MSA_MesaV3_Manual_260106.pdf
Parameters
| Name | Value | Range |
|---|---|---|
| Pivot Spacing (c/c) | 260 mm | 120 – 420 |
| Pivot Pin Bore | 12 mm | 6 – 20 |
| Snap Slot Width | 10 mm | 4 – 18 |
| Hub OD | 34 mm | 22 – 60 |
| Hub Thickness | 12 mm | 6 – 30 |
| Handle Height | 170 mm | 60 – 260 |
| Bar Diameter | 20 mm | 10 – 34 |
| Grip Sleeve Dia | 26 mm | 12 – 44 |
| Grip Sleeve Length | 90 mm | 30 – 240 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm