Brackets and mounts
Medicine Coaster: Base Plate + Actuator Disc
- Bounding box
- 146.0 × 69.8 × 9.5 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- September 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a bare functional 2-piece mechanical prototype for a smart medicine coaster with exact metric cutouts: Part 1 - Base Mount: - A flat circular plate, 70mm diameter and 6mm thick. - A center rectangular cutout measuring 20mm x 6.5mm x 6mm deep to tightly seat a subminiature micro limit switch (KW12-3 / V-15-1C25). - Two through-holes, 2.5mm diameter, spaced 9.5mm apart along the switch pocket for M2 mounting screws. - A 8mm wide wire exit slot cutting from the switch pocket straight to the outer edge of the circular plate for jumper wires to route to the ESP32. - A 5mm round vertical through-hole positioned near the outer perimeter for a 5mm diffused RGB LED. - A 12mm round through-hole located opposite the LED to friction-fit an active piezo buzzer module. Part 2 - Actuator / Bottle Resting Plate (placed side-by-side next to the base): - A flat circular disc, 66mm diameter and 3mm thick, sized to hold a medicine bottle. - A rectangular boss/tab protruding from the underside center, measuring 10mm x 6mm and 3.5mm tall, aligned to press down directly onto the micro switch lever when a pill bottle is placed on top. Do not include any outer case, decorative cover, or enclosure walls. Generate only the bare mounting base plate and the floating actuator disc.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Diameter | 70 mm | 40 – 120 |
| Base Plate Thickness | 6 mm | 2 – 15 |
| Switch Pocket Length | 20 mm | 5 – 40 |
| Switch Pocket Width | 6.5 mm | 3 – 25 |
| Switch Pocket Depth | 6 mm | 1 – 15 |
| M2 Mounting Hole Dia | 2.5 mm | 1 – 5 |
| M2 Hole Spacing | 9.5 mm | 3 – 30 |
| Wire Exit Slot Width | 8 mm | 2 – 20 |
| RGB LED Hole Dia | 5 mm | 2 – 12 |
| Buzzer Hole Dia | 12 mm | 5 – 25 |
| LED / Buzzer Position Radius | 25 mm | 10 – 32 |
| Actuator Disc Diameter | 66 mm | 30 – 120 |
| Actuator Disc Thickness | 3 mm | 1 – 10 |
| Underside Boss Length | 10 mm | 2 – 30 |
| Underside Boss Width | 6 mm | 2 – 30 |
| Underside Boss Height | 3.5 mm | 1 – 15 |
| Exploded Layout Gap | 10 mm | 1 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu