Everything else
Mechanical Support Plate
- Bounding box
- 246.4 × 47 × 239.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
crea un modelo 3d cad de una placa de soporte mecanico. el cuerpo principal con un radio exterior R2=123.20mm y un radio de corte central inferior R3=42.11mm. en las esquinas inferiores, posiciona dos bases cilindricas con diametro D1=20.91mm y D2=41.82mm, separadas por un angulo A1=30.00 grados desde el centro, conectadas con empalmes R1=4.00mm . en la seccion superior, incluye un cubo con diametro exterior D4=23.00mm, un agujero central D5=43.70mm, una altura de referencia vertical D6= 68.61mm, y una matriz circular de N=6 agujeros pequeños con diametro D3=8.29mm. conecta las estructuras superior e inferior usando dos nervios de refuerzo diagonales de ancho L1=15.00mm y radio lateral R4= 112.00mm. aplica extrusiones escalonadas a las secciones usando los espesores E1=13.00mm, E2=18.00mm, E3=15mm, E4=25.00mm, E5=17.00mm, E6=7.00mm y E7=7.00mm
Parameters
| Name | Value | Range |
|---|---|---|
| Outer radius R2 | 123.2 mm | 40 – 200 |
| Lower central cut radius R3 | 42.11 mm | 10 – 90 |
| Base boss half-angle from centre A1 | 30 deg | 5 – 60 |
| Fillet radius R1 | 4 mm | 0.5 – 15 |
| Base bore diameter D1 | 20.91 mm | 4 – 60 |
| Base boss diameter D2 | 41.82 mm | 10 – 100 |
| Small hole diameter D3 | 8.29 mm | 2 – 20 |
| Central bore diameter D4 | 23 mm | 5 – 60 |
| Hole pitch circle D5 | 43.7 mm | 10 – 120 |
| Vertical reference D6 | 68.61 mm | 10 – 200 |
| Number of small holes | 6 mm | 3 – 12 |
| Rib width L1 | 15 mm | 3 – 50 |
| Lateral radius R4 | 112 mm | 20 – 200 |
| Plate thickness E1 | 13 mm | 2 – 40 |
| Hub pad height E2 | 18 mm | 2 – 60 |
| Step disc height E3 | 15 mm | 2 – 60 |
| Hub barrel length E4 | 25 mm | 2 – 80 |
| Base boss height E5 | 17 mm | 2 – 60 |
| Rear hub boss thickness E6 | 7 mm | 1 – 30 |
| Rib thickness E7 | 7 mm | 1 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
