Loading the interactive model…
Interactive 3D model of Mechanical CarrotEverything else
Mechanical Carrot
14 views
- Bounding box
- 120.1 × 50.1 × 50.1 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- August 10, 2026
Download
Free to download and use. See the terms.
The prompt
подвижная морковка, механическое движение
Parameters
| Name | Value | Range |
|---|---|---|
| Carrot Length | 120 mm | 80 – 200 |
| Carrot Top Diameter | 50 mm | 20 – 100 |
| Carrot Bottom Diameter | 20 mm | 5 – 50 |
| Front Axle Position X | 100 mm | 60 – 110 |
| Rear Axle Position X | 40 mm | 10 – 80 |
| Axle Diameter | 8 mm | 4 – 16 |
| Axle Length | 60 mm | 40 – 100 |
| Axle Hole Diameter (clearance) | 8.5 mm | 8.1 – 12 |
| Wheel Diameter | 40 mm | 20 – 80 |
| Wheel Thickness | 10 mm | 4 – 20 |
| Wheel Bore Diameter | 8 mm | 4 – 16 |
| Crank Arm Length | 30 mm | 10 – 60 |
| Crank Arm Diameter | 8 mm | 4 – 16 |
| Crank Handle Diameter | 12 mm | 6 – 24 |
| Crank Handle Length | 40 mm | 20 – 60 |
| Crank Handle Y Offset | 15 mm | 5 – 30 |
| Leaf Count | 5 | 3 – 7 |
| Leaf Width | 15 mm | 8 – 30 |
| Leaf Height | 80 mm | 40 – 120 |
| Leaf Thickness | 3 mm | 1 – 6 |
| Leaf Tilt Angle | 15 deg | 0 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS