Gears and transmission
Meat Grinder Middle Gear (78T Helical + 7T Spur)
- Bounding box
- 68.0 × 68.0 × 32.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø18(7teeth), hole Ø6, total height 32 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Wheel Outer Diameter | 68 mm | 30 – 120 |
| Wheel Teeth | 78 teeth | 12 – 160 |
| Wheel Face Width | 18 mm | 1 – 31.5 |
| Helix Angle (right hand) | 20 deg | 0 – 40 |
| Pinion Outer Diameter | 18 mm | 6 – 60 |
| Pinion Teeth | 7 teeth | 6 – 40 |
| Bore Diameter | 6 mm | 2 – 20 |
| Total Stack Height | 32 mm | 6 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled