Everything else
MDF Box with Car Audio Components
- Bounding box
- 780.0 × 450.0 × 300.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Создай полный чертëж короба с размерами где магнитола 1 Дин находится чуть ниже середины сверху отверстия магнитолы находятся 3 отверстия под вольт 2 вольт метра и 1 для температуры по бокам находятся 16.5 диаметром динамики и рядом с ним отверстия для пищалки по бокам корпуса ручки для переноса с зади на стенки короба выведена под блок питания битман 1600 вентиляция и провод питания на нижней части короба есть тоже вентиляционное отверстие для продувки блока питания и магнитолы
Parameters
| Name | Value | Range |
|---|---|---|
| Box Width | 500 mm | 200 – 800 |
| Box Height | 300 mm | 200 – 600 |
| Box Depth | 200 mm | 100 – 400 |
| Wall Thickness | 15 mm | 5 – 30 |
| Radio Width | 178 mm | 150 – 200 |
| Radio Height | 50 mm | 40 – 60 |
| Radio Depth | 150 mm | 100 – 200 |
| Radio Center Y (from bottom) | 140 mm | 50 – 250 |
| Instrument Diameter | 30 mm | 20 – 60 |
| Instrument Depth | 20 mm | 10 – 40 |
| Instruments Center Y | 200 mm | 120 – 280 |
| Speaker Diameter | 165 mm | 100 – 200 |
| Speaker Depth | 70 mm | 40 – 120 |
| Speaker Center Z (from front) | 100 mm | 30 – 170 |
| Tweeter Diameter | 30 mm | 20 – 50 |
| Tweeter Depth | 15 mm | 10 – 30 |
| Tweeter Center Z (from front) | 20 mm | 10 – 170 |
| Handle Length (along Z) | 150 mm | 80 – 200 |
| Handle Width (thickness) | 20 mm | 10 – 40 |
| Handle Height (offset from panel) | 30 mm | 15 – 50 |
| Handle Center Y (from bottom) | 290 mm | 200 – 300 |
| PSU Length (along X) | 200 mm | 100 – 300 |
| PSU Width (along Y) | 100 mm | 50 – 200 |
| PSU Height (along Z) | 50 mm | 30 – 100 |
| PSU Center Y | 70 mm | 20 – 250 |
| Vent Grille Length (along X) | 100 mm | 50 – 200 |
| Vent Grille Width (along Y) | 50 mm | 30 – 100 |
| Vent Grille Thickness | 2 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm