Everything else
Mate Straw Bombilla - Two Snap-Lock Halves
- Bounding box
- 12 × 12 × 100 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
اريد منك انشا تصميم لمصاصة متة مقسمة الى جزئين منفصلين بالمنتصف بحيث طول كل نصف 5.5سم و يمكن دمجهما معا بطريقة محكمة و غير قابلة للفك مرة اخرى
Parameters
| Name | Value | Range |
|---|---|---|
| Straw outer diameter | 9 mm | 6 – 16 |
| Drinking bore diameter | 5.4 mm | 2 – 12 |
| Printed length of EACH half | 55 mm | 40 – 90 |
| Filter bulb diameter | 12 mm | 8 – 22 |
| Filter bulb height | 11 mm | 6 – 25 |
| Filter slot width | 1.4 mm | 0.6 – 3 |
| Filter slot height | 5.5 mm | 2 – 10 |
| Number of filter slots | 6 mm | 3 – 12 |
| Insertion depth of the joint | 10 mm | 6 – 25 |
| Female socket bore | 7.4 mm | 4 – 14 |
| Male spigot diameter | 7.2 mm | 4 – 14 |
| Snap-ring diameter | 7.7 mm | 4.2 – 15 |
| Snap-ring height | 2 mm | 1 – 5 |
| Snap groove diameter | 7.6 mm | 4.2 – 15 |
| Reinforcing collar diameter | 9.8 mm | 6 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm