Loading the interactive model…
Interactive 3D model of Marking AMR AssemblyEverything else
Marking AMR Assembly
36 views
- Bounding box
- 550.0 × 420.0 × 610.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
A marking AMR that use pre-defined map to draw on ground
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 500 mm | 200 – 800 |
| Chassis Width | 400 mm | 150 – 600 |
| Chassis Thickness | 80 mm | 20 – 150 |
| Chassis Bottom Height Above Ground | 80 mm | 30 – 200 |
| Drive Wheel Diameter | 120 mm | 50 – 300 |
| Drive Wheel Width | 40 mm | 10 – 100 |
| Drive Wheel X Offset (rear) | -200 mm | -400 – 0 |
| Drive Wheel Y Offset (track) | 180 mm | 50 – 300 |
| Caster Wheel Diameter | 60 mm | 20 – 120 |
| Caster Wheel Width | 25 mm | 10 – 60 |
| Caster X Position (front) | 250 mm | 0 – 400 |
| Pen Holder Diameter | 50 mm | 10 – 100 |
| Pen Holder Height | 80 mm | 30 – 200 |
| Pen Diameter | 15 mm | 5 – 30 |
| Pen Length | 150 mm | 50 – 250 |
| LIDAR Tower Height | 300 mm | 100 – 600 |
| LIDAR Base Diameter | 80 mm | 30 – 150 |
| LIDAR X Position (front) | 250 mm | 0 – 400 |
| Control Unit Length (X) | 180 mm | 100 – 300 |
| Control Unit Width (Y) | 120 mm | 50 – 250 |
| Control Unit Height (Z) | 60 mm | 20 – 120 |
| Control Unit X Position | -150 mm | -400 – 0 |
| Battery Length (X) | 200 mm | 100 – 400 |
| Battery Width (Y) | 150 mm | 50 – 250 |
| Battery Height (Z) | 50 mm | 20 – 100 |
| Battery X Position | -150 mm | -400 – 0 |
| Light Bar Length (Y) | 200 mm | 50 – 400 |
| Light Bar Width (X) | 20 mm | 5 – 50 |
| Light Bar Height (Z) | 10 mm | 2 – 30 |
| Light Bar X Position (rear) | -240 mm | -400 – 0 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS