Brackets and mounts
Manual Rocker-Arm Punching Machine (Exploded Multi-Part)
- Bounding box
- 2303.3 × 300.0 × 440.0 mm
- Engine
- Precision B-rep
- Parameters
- 62
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
```yaml task: generate_3d_cad_assembly name: manual_rocker_arm_punching_machine units: mm reference: engineering_drawing: primary_for_dimensions isometric_view: primary_for_appearance dimension_policy: use_verified_dimensions; estimate_unreadable_dimensions components: - {id: P01, name: main_C_frame, geometry: extruded_C_profile, color: red, fixed: true} - {id: P02, name: base, geometry: integrated_with_frame_if_drawing_confirms} - {id: P03, name: threaded_vertical_screw, geometry: cylindrical_shaft_with_helical_thread} - {id: P04, name: hand_lever, geometry: transverse_rod_with_central_hub} - {id: P05, name: handle_knob_left, geometry: spherical_or_rounded, color: brown} - {id: P06, name: handle_knob_right, geometry: spherical_or_rounded, color: brown} - {id: P07, name: guide_rail, geometry: prismatic} - {id: P08, name: moving_punch_holder, geometry: machined_block, color: green} - {id: P09, name: punch, geometry: cylindrical_tool} - {id: P10, name: die, geometry: block_with_punch_aperture} - {id: P11, name: guide_supports, geometry: machined_brackets} - {id: P12, name: fasteners, geometry: bolts_nuts_washers} assembly_constraints: - {type: fixed, component: P01} - {type: coincident, components: [P10, P02], surfaces: mounting_faces} - {type: concentric, components: [P09, P10], feature: punch_axis_and_die_aperture} - {type: concentric, components: [P03, P04], feature: lever_hub_and_screw_axis} - {type: concentric, components: [P05, P04], feature: left_handle_interface} - {type: concentric, components: [P06, P04], feature: right_handle_interface} - {type: parallel, components: [P03, P07], feature: vertical_axes} - {type: coincident, components: [P11, P01], feature: mounting_surfaces} - {type: screw_motion, components: [P03, P08], condition: follow_actual_mechanism} - {type: linear_motion, component: P08, axis: vertical} - {type: rigid, components: [P12], condition: fasteners_fixed_after_assembly} modeling: separate_editable_parts: true parametric_features: true preserve_design_intent: true use_standard_features: [extrude, revolve, cut, fillet, chamfer, hole, helix] avoid_unnecessary_mesh_geometry: true prevent_interference: true preserve_required_degrees_of_freedom: true validation: check_dimensions: true check_component_alignment: true check_interference: true check_constraint_conflicts: true check_punch_die_clearance: true document_estimated_dimensions: true appearance: frame: red lever: metallic_yellow knobs: dark_brown guide_assembly: green hardware: metallic outputs: - native_CAD_assembly - individual_editable_parts - exploded_assembly - isometric_render - bill_of_materials - dimensional_uncertainty_report priority: - dimensional_accuracy - mechanical_consistency - assembly_functionality - visual_similarity ```
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Width | 180 mm | 120 – 260 |
| Frame Depth | 300 mm | 180 – 420 |
| Frame Height | 420 mm | 280 – 600 |
| Column Thickness | 50 mm | 25 – 90 |
| Lower Foot Thickness | 40 mm | 20 – 80 |
| Top Arm Thickness | 45 mm | 20 – 90 |
| Top Arm Screw Bore | 26 mm | 20 – 40 |
| Foot Bolt Hole Dia | 11 mm | 6 – 18 |
| Foot Hole Spacing | 100 mm | 50 – 160 |
| Screw Axis Y Offset | 70 mm | 20 – 130 |
| Base Plate Length | 300 mm | 180 – 420 |
| Base Plate Width | 200 mm | 120 – 320 |
| Base Plate Thickness | 30 mm | 12 – 60 |
| Mounting Hole Dia | 10 mm | 5 – 18 |
| Hole Inset From Edge | 40 mm | 15 – 80 |
| Centre Slug Hole Dia | 40 mm | 0 – 80 |
| Screw Diameter | 24 mm | 12 – 40 |
| Screw Length | 350 mm | 200 – 520 |
| Threaded Length | 250 mm | 100 – 400 |
| Thread Pitch | 3 mm | 1.5 – 8 |
| Thread Depth | 1.5 mm | 0.5 – 4 |
| Lever Overall Length | 400 mm | 200 – 600 |
| Lever Rod Diameter | 20 mm | 10 – 36 |
| Lever Hub Diameter | 50 mm | 30 – 90 |
| Lever Hub Height | 40 mm | 20 – 80 |
| Handle Knob Diameter | 35 mm | 20 – 60 |
| Handle Knob Length | 45 mm | 25 – 80 |
| Guide Rail Length | 250 mm | 120 – 400 |
| Guide Rail Width | 30 mm | 15 – 60 |
| Guide Rail Thickness | 20 mm | 8 – 45 |
| Guide Rail Hole Dia | 9 mm | 4 – 16 |
| Holder Length | 100 mm | 60 – 180 |
| Holder Width | 80 mm | 50 – 140 |
| Holder Height | 60 mm | 35 – 120 |
| Holder Screw Bore | 26 mm | 18 – 44 |
| Holder Punch Bore | 21 mm | 12 – 40 |
| Holder Bore Depth | 35 mm | — |
| Guide Bracket Length | 80 mm | 40 – 140 |
| Guide Bracket Width | 40 mm | 20 – 80 |
| Guide Bracket Height | 30 mm | 15 – 60 |
| Bracket Vertical Gap | 60 mm | 30 – 140 |
| Bracket Hole Dia | 10 mm | 5 – 18 |
| Punch Diameter | 20 mm | 10 – 40 |
| Punch Length | 80 mm | 40 – 160 |
| Punch Tip Diameter | 14 mm | 6 – 30 |
| Punch Tip Length | 20 mm | 8 – 60 |
| Die Length | 120 mm | 70 – 200 |
| Die Width | 100 mm | 60 – 180 |
| Die Thickness | 40 mm | 20 – 80 |
| Die Aperture Dia | 22 mm | 10 – 44 |
| Die Relief Dia | 34 mm | 12 – 60 |
| Die Mounting Hole Dia | 11 mm | 5 – 18 |
| Bolt Shank Dia | 10 mm | 5 – 20 |
| Bolt Head Across Flats | 17 mm | 8 – 30 |
| Bolt Head Height | 6.5 mm | 3 – 14 |
| Bolt Shank Length | 40 mm | 15 – 90 |
| Nut Across Flats | 17 mm | 8 – 30 |
| Nut Thickness | 8 mm | 4 – 18 |
| Washer Outside Dia | 20 mm | 10 – 40 |
| Washer Inside Dia | 10.5 mm | 5 – 22 |
| Washer Thickness | 2 mm | 0.8 – 6 |
| Exploded Layout Gap | 60 mm | 10 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu