Gears and transmission
Manual Paper Roll Lifting Cart
- Bounding box
- 1577.5 × 1172.5 × 2025.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- October 7, 2026
Download
Free to download and use. See the terms.
The prompt
A manual lifting cart for paper rolls. Welded steel frame. Base: 1200 x 1100 mm, made from 80x80x4 mm square tube, with four caster wheels. Two vertical columns, 80x60 mm box section, 1800 mm tall, mounted at the back of the base. A lifting platform 1150 x 1100 mm slides up and down between the columns. On the platform, three V-shaped cradles hold paper rolls of 370 mm diameter. A hand crank with a gearbox is mounted on the side of one column.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Frame Length | 1200 mm | 800 – 1600 |
| Base Frame Width | 1100 mm | 700 – 1500 |
| Square Tube Section | 80 mm | 40 – 120 |
| Caster Wheel Diameter | 125 mm | 75 – 200 |
| Caster Wheel Width | 40 mm | 20 – 80 |
| Caster Mounting Height | 150 mm | 100 – 300 |
| Caster Plate Size | 100 mm | 60 – 200 |
| Column Height | 1800 mm | 1000 – 2500 |
| Column Section (X) | 80 mm | 40 – 120 |
| Column Section (Y) | 60 mm | 40 – 120 |
| Platform Length | 1150 mm | 800 – 1600 |
| Platform Width | 1100 mm | 700 – 1500 |
| Platform Thickness | 40 mm | 10 – 80 |
| Platform Top Height | 900 mm | 300 – 1800 |
| Paper Roll Diameter | 370 mm | 200 – 600 |
| Cradle Length | 1000 mm | 600 – 1400 |
| Cradle Width | 350 mm | 150 – 500 |
| Cradle Height | 260 mm | 120 – 500 |
| Gearbox Depth | 140 mm | 60 – 300 |
| Gearbox Size (H/W) | 220 mm | 100 – 400 |
| Crank Handle Grip Length | 100 mm | 50 – 250 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled