122.8135.9128.5
Loading the interactive model…
Interactive 3D model of Mainbody — front slit and inner recess restored

Everything else

Mainbody — front slit and inner recess restored

1 views
Bounding box
135.9 × 122.8 × 128.5 mm
Engine
Precision B-rep
Parameters
61
Published
November 16, 2026

Download

Free to download and use. See the terms.

The prompt

Editable CadQuery reconstruction with the missing front slit restored as a profile cut connected through a 3.5 mm throat and 16 mm-radius bend to the rectangular bottom opening. Adds the measured 9.2 mm-diameter, 16.348 mm-deep coaxial blind hole inside the large side opening. Smooth top bore retained. Other existing reconstruction approximations retained.

Parameters

NameValueRange
Body height128 mm96 – 160
Base diameter122.34 mm73.404 – 165.159
Top outer diameter74.58 mm44.748 – 100.683
Top bore diameter68.2 mm40.92 – 92.07
Top bore depth20.4 mm15.3 – 25.5
Funnel bottom z94 mm70.5 – 117.5
Funnel bottom diameter20.8 mm12.48 – 28.08
Side bore diameter44.95 mm26.9724 – 60.6879
Side bore height70.85 mm53.1349 – 88.5582
Side bore y-0.21 mm-10.2101 – 9.7899
Side bore end x21.5 mm11.5 – 31.5
Flange face x-40.98 mm-50.981 – -30.981
Flange width107.5 mm80.625 – 134.375
Flange height77 mm57.75 – 96.25
Flange center z71.33 mm61.328 – 81.328
Mount hole diameter4.4 mm2.64 – 5.94
Mount hole depth9 mm6.75 – 11.25
Mount y1-31.58 mm-41.5808 – -21.5808
Mount z145.22 mm35.2203 – 55.2203
Mount y231.29 mm21.294 – 41.294
Mount z296.82 mm86.8223 – 106.8223
Well width38.11 mm28.5795 – 47.6325
Well depth25.05 mm18.7882 – 31.3137
Well center x0.45 mm-9.553 – 10.447
Well center y-0.28 mm-10.2805 – 9.7195
Well bottom z89.46 mm67.095 – 111.825
Well top z102 mm76.5 – 127.5
Base pocket width86 mm64.5 – 107.5
Base pocket depth39.61 mm29.7052 – 49.5087
Base pocket height28.95 mm21.7088 – 36.1812
Base pocket x-0.44 mm-10.442 – 9.558
Base pocket y6.75 mm-3.2535 – 16.7465
Channel width29 mm21.75 – 36.25
Channel end x12 mm2 – 22
Channel center y-38.76 mm-48.76 – -28.76
Channel floor1.5 mm1.125 – 1.875
Channel roof21.5 mm16.125 – 26.875
Ramp width30.5 mm22.875 – 38.125
Ramp center x-3.25 mm-13.25 – 6.75
Ramp start y-53.26 mm-63.26 – -43.26
Ramp end y0 mm-10 – 10
Ramp lower start z10 mm7.5 – 12.5
Ramp lower end z57 mm42.75 – 71.25
Ramp upper start z28.3 mm21.225 – 35.375
Ramp upper end z70.7 mm53.025 – 88.375
Tab center x-58.96 mm-68.96 – -48.96
Tab center y-39.76 mm-49.76 – -29.76
Tab width31 mm23.25 – 38.75
Tab reach x-30 mm-40 – -20
Tab height5 mm3.75 – 6.25
Tab wall2 mm1.5 – 2.5
Inner hole diameter9.2 mm2 – 16
Inner hole depth16.35 mm2 – 24
Front slit throat width3.5 mm1.5 – 7
Front slit height above pocket13.15 mm10 – 17
Front slit side extension2 mm0 – 4
Pocket entrance bend radius16 mm8 – 22
Pocket entrance floor thickness2 mm1 – 4
Pocket entrance lip length4 mm2 – 8
Pocket mouth enlargement1.5 mm0.5 – 2.5
Pocket mouth recess depth1.2 mm0.5 – 1.8

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Mainbody — front slit and inner recess restored - Free CAD Model (STEP, STL) | TextoCAD