Everything else
Magnetic Modular Base Plate (16 Pockets on 8x4 Grid)
- Bounding box
- 310.0 × 170.0 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- October 5, 2026
Download
Free to download and use. See the terms.
The prompt
but place the 16 magnetpockets in the base at the corners of an imaginary 8 by 4 grid
Parameters
| Name | Value | Range |
|---|---|---|
| Layout gap (print spacing) | 20 mm | 5 – 60 |
| Base width X | 90 mm | 40 – 200 |
| Base length Y | 170 mm | 40 – 300 |
| Base plate thickness | 10 mm | 4 – 25 |
| Base perimeter wall thickness | 3 mm | 1.5 – 8 |
| Base perimeter wall height | 8 mm | 0 – 30 |
| Base corner radius | 6 mm | 0 – 20 |
| Edge round-over | 0.6 mm | 0 – 1.5 |
| Magnet diameter | 8 mm | 3 – 20 |
| Magnet thickness | 3 mm | 1 – 10 |
| Pocket clearance (radial) | 0.4 mm | 0 – 1.5 |
| Base pocket diameter | 9 mm | 3 – 20 |
| Pocket columns (X) | 4 pcs | 1 – 8 |
| Pocket rows (Y) | 4 pcs | 1 – 8 |
| Imaginary grid columns (X) | 8 cells | 1 – 24 |
| Imaginary grid rows (Y) | 4 cells | 1 – 12 |
| Module magnet inset from edge | 6 mm | 2 – 20 |
| Module wall thickness | 2 mm | 1 – 5 |
| Module floor thickness | 3 mm | 1 – 10 |
| Module corner radius | 3 mm | 0 – 12 |
| Divider wall thickness | 2 mm | 1 – 6 |
| Module 1 width | 40 mm | 15 – 120 |
| Module 1 depth | 30 mm | 15 – 120 |
| Module 1 height | 25 mm | 5 – 80 |
| Module 2 width | 40 mm | 15 – 120 |
| Module 2 depth | 30 mm | 15 – 120 |
| Module 2 height | 25 mm | 5 – 80 |
| Module 3 width | 30 mm | 15 – 120 |
| Module 3 depth | 40 mm | 15 – 120 |
| Module 3 height | 25 mm | 5 – 80 |
| Module 4 width | 30 mm | 15 – 120 |
| Module 4 depth | 40 mm | 15 – 120 |
| Module 4 height | 25 mm | 5 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm