Magnetic Modular Base + 4 Modules (Exploded Layout)

1 views

Bounding box: 430.0 × 170.0 × 80.0 mm
Engine: Precision B-rep
Parameters: 36
Published: October 6, 2026

Download

Free to download and use. See the terms.

The prompt

Create a precise functional CAD model with 1 base and 4 separate modules. Follow all dimensions exactly. Do not invent or change specifications. BASE: Outer size: 90 × 170 mm. Base thickness: 10 mm. Interior area: 80 × 160 mm. Perimeter wall: 5 mm thick and 8 mm high above the base. Total wall height: 18 mm. Round all corners and edges. BASE MAGNET GRID: Exactly 16 individual magnet pockets. Pocket size: Ø9.5 × 3 mm for FDM/PLA clearance. Arrange the 16 pockets as 4 groups of 4. Each group represents the 4 corners of a 40 × 80 mm reference rectangle. The four reference rectangles define the modular grid across the 80 × 160 mm interior area. Reference rectangles are conceptual only and must NOT be modeled or shown. All 16 pockets must be individual, precise and correctly aligned. Magnets sit 1 mm below the top surface of the base. MODULE MAGNETS: Each module has exactly 4 magnet pockets, one near each bottom corner. Pocket size: Ø9.5 × 3 mm. Exactly 1 mm PLA remains below each magnet. Magnet positions must match the corresponding base positions exactly. MODULE 1: 80 × 80 × 80 mm. Hollow, open top. Walls: 7 mm thick. No divider. 4 matching magnet pockets. MODULE 2: 80 × 80 × 80 mm. Hollow, open top. Walls: 7 mm thick. Central 7 mm divider → 2 equal compartments. 4 matching magnet pockets. MODULE 3: 40 × 80 × 70 mm. Hollow, open top. Walls: 7 mm thick. No divider. 4 matching magnet pockets. MODULE 4: 40 × 80 × 70 mm. Hollow, open top. Walls: 7 mm thick. Central 7 mm divider → 2 compartments. 4 matching magnet pockets. CAD / SHAPE: Round all inner and outer corners and edges. Rounding must not change the specified overall dimensions. Base and all modules are separate CAD bodies. Place all parts next to each other without touching or overlapping. Do not place modules on the base. Optimize geometry for PLA/FDM printing. Create real editable CAD geometry, not a render.

Parameters

Name	Value	Range
Base Outer Width X	90 mm	30 – 400
Base Outer Length Y	170 mm	30 – 600
Base Plate Thickness	10 mm	5 – 40
Base Wall Thickness	5 mm	1.5 – 20
Base Wall Height Above Plate	8 mm	1 – 60
Base Outer Corner Radius	3 mm	0 – 15
Base Cavity Corner Radius	2.5 mm	0 – 12
Base Rim Round-Off	1.5 mm	0 – 2.4
Base Bottom Edge Round-Off	1 mm	0 – 2.4
Reference Rectangles Along X	2 pcs	1 – 3
Reference Rectangles Along Y	2 pcs	1 – 3
Magnet Pocket Diameter	9.5 mm	3 – 25
Magnet Pocket Depth	3 mm	1 – 12
Pocket Inset From Corner	10 mm	7 – 18
PLA Above Base Magnet	1 mm	0.5 – 5
PLA Below Module Magnet	1 mm	0.5 – 5
Module Wall Thickness	7 mm	2 – 25
Module Floor Thickness	7 mm	6 – 30
Divider Thickness	7 mm	2 – 25
Module Outer Corner Radius	3 mm	0 – 15
Module Cavity Corner Radius	3 mm	0 – 15
Module Rim Round-Off	2 mm	0 – 3.4
Module Bottom Edge Round-Off	1 mm	0 – 3.4
Module 1 Width X	80 mm	20 – 300
Module 1 Depth Y	80 mm	20 – 300
Module 1 Height	80 mm	15 – 300
Module 2 Width X	80 mm	20 – 300
Module 2 Depth Y	80 mm	20 – 300
Module 2 Height	80 mm	15 – 300
Module 3 Width X	40 mm	20 – 300
Module 3 Depth Y	80 mm	20 – 300
Module 3 Height	70 mm	15 – 300
Module 4 Width X	40 mm	20 – 300
Module 4 Depth Y	80 mm	20 – 300
Module 4 Height	70 mm	15 – 300
Exploded Layout Gap	25 mm	2 – 150

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS