Everything else
Magnetic Base + 4 Modules
- Bounding box
- 450.0 × 170.0 × 80.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- October 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, functional CAD model with 1 base and 4 separate modules. Follow all dimensions exactly. Do not invent or change specifications. BASE: Overall outer size: 90 × 170 mm. Base thickness: 10 mm. Interior area: 80 × 160 mm. Perimeter wall: 5 mm thick and 8 mm high above the base. Total wall height: 18 mm. Round all corners and edges. BASE MAGNET GRID: 32 magnets total. Layout: 4 × 8 grid. Grid area: 80 × 160 mm. Each grid cell has one magnet at each corner, creating exactly 32 unique magnet positions. Magnets: Ø8 × 3 mm. Create magnet pockets slightly larger than Ø8 mm and 3 mm deep, with enough clearance for easy PLA/FDM assembly. Magnets sit 1 mm below the top surface of the base. Keep all magnet positions precise, symmetric and consistent. MODULE MAGNETS: Each module has exactly 4 magnets, one near each bottom corner. Magnets: Ø8 × 3 mm. Use slightly oversized pockets with enough clearance for PLA/FDM printing. From the bottom upward: exactly 1 mm PLA, then the magnet pocket. Magnet positions must match the corresponding positions of the base grid exactly. MODULE 1: Outer size: 80 × 80 × 80 mm. Hollow and open at the top. Wall thickness: 7 mm. No divider. 4 matching magnets underneath, one near each corner. MODULE 2: Outer size: 80 × 80 × 80 mm. Hollow and open at the top. Wall thickness: 7 mm. One central divider, 7 mm thick, creating 2 equal compartments. 4 matching magnets underneath, one near each corner. MODULE 3: Outer size: 40 × 80 × 70 mm. Hollow and open at the top. Wall thickness: 7 mm. No divider. 4 matching magnets underneath, one near each corner. MODULE 4: Outer size: 40 × 80 × 70 mm. Hollow and open at the top. Wall thickness: 7 mm. One central divider, 7 mm thick, creating 2 compartments. 4 matching magnets underneath, one near each corner. SHAPE AND CAD: Round all outer and inner corners and edges. Keep all dimensions exact after rounding; fillets must not change the specified overall dimensions. Base and all 4 modules must be separate CAD bodies. Place all parts next to each other without touching or overlapping. Do not place modules on the base. Use clean, functional geometry optimized for PLA/FDM printing. Create real editable CAD geometry, not a render. Magnet pockets must include practical FDM clearance so Ø8 × 3 mm magnets fit without forcing.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap Between Parts | 30 mm | 5 – 150 |
| Base Width (X) | 90 mm | 40 – 250 |
| Base Length (Y) | 170 mm | 40 – 350 |
| Base Plate Thickness | 10 mm | 3 – 30 |
| Perimeter Wall Thickness | 5 mm | 2 – 20 |
| Wall Height Above Plate | 8 mm | 2 – 40 |
| Base Corner Radius | 6 mm | 0 – 25 |
| Magnet Diameter | 8 mm | 2 – 20 |
| Magnet Thickness | 3 mm | 1 – 12 |
| Pocket FDM Clearance | 0.4 mm | 0 – 1.5 |
| Magnet Inset From Edge | 10 mm | 4 – 40 |
| Grid Pitch | 20 mm | 5 – 60 |
| Grid Columns (X) | 4 pcs | 1 – 10 |
| Grid Rows (Y) | 8 pcs | 1 – 20 |
| Module Wall Thickness | 7 mm | 2 – 20 |
| Module Floor Thickness | 7 mm | 2 – 20 |
| Module Corner Radius | 8 mm | 0 – 20 |
| Divider Thickness | 7 mm | 2 – 20 |
| Module 1 Width (X) | 80 mm | 20 – 200 |
| Module 1 Depth (Y) | 80 mm | 20 – 200 |
| Module 1 Height (Z) | 80 mm | 15 – 250 |
| Module 2 Width (X) | 80 mm | 20 – 200 |
| Module 2 Depth (Y) | 80 mm | 20 – 200 |
| Module 2 Height (Z) | 80 mm | 15 – 250 |
| Module 3 Width (X) | 40 mm | 20 – 200 |
| Module 3 Depth (Y) | 80 mm | 20 – 200 |
| Module 3 Height (Z) | 70 mm | 15 – 250 |
| Module 4 Width (X) | 40 mm | 20 – 200 |
| Module 4 Depth (Y) | 80 mm | 20 – 200 |
| Module 4 Height (Z) | 70 mm | 15 – 250 |
| Top Edge Round | 1.5 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm