Magnetic Base + 2 Modules (Exploded)

Create 3 separate, functional CAD bodies: 1 base and 2 modules. Follow every specification exactly. Do not invent, remove, or change anything. BASE: Overall: 210 × 110 × 10 mm. Interior area: 200 × 100 mm. Perimeter wall: 5 mm thick, 8 mm high above the base → 18 mm total height. Round all corners and edges. BASE MAGNET GRID: Exactly 16 unique magnet positions. Magnets: Ø8 × 3 mm. Arrangement based on four 50 × 100 mm reference rectangles, with 4 magnet positions at the corners of each rectangle. The rectangles are only conceptual references and must NOT be modeled or shown. Do not merge, duplicate, or remove positions. Magnets are positioned 1 mm below the top surface of the base. Positions must be exact and symmetric. MODULE 1: 100 × 100 × 100 mm. Hollow and open at the top. Bottom: 10 mm thick. Walls: 8 mm thick. 4 × Ø8 × 3 mm magnets at the bottom corners. 1 mm PLA below each magnet. Magnet positions match the base grid. Round all inner and outer corners/edges. MODULE 2: 100 × 100 × 80 mm. Hollow and open at the top. Bottom: 10 mm thick. Outer walls: 8 mm thick. Central divider: 8 mm thick, creating 2 equal chambers. 4 × Ø8 × 3 mm magnets at the bottom corners. 1 mm PLA below each magnet. Magnet positions match the base grid. Round all inner and outer corners/edges. LAYOUT: Base and both modules are separate CAD bodies. Place all 3 bodies next to each other. They must not touch or overlap. Do not place the modules on the base. Create precise, editable CAD geometry suitable for 3D printing, not a render.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.