Maglev Continuous Flow Centrifugal Pump

1 views

Bounding box: 65.0 × 50.0 × 49.0 mm
Engine: Precision B-rep
Parameters: 26
Published: September 28, 2026

Download

Free to download and use. See the terms.

The prompt

help me build a continous flow cenrifugal pump with maglev using artificial heart dimensions that can be coded with raspeberry pi, be cnc milled, built, coded, and used to circulate "blood"

Parameters

Name	Value	Range
Housing OD	50 mm	30 – 80
Housing Height	40 mm	20 – 60
Chamber Diameter	40 mm	20 – 60
Chamber Depth	15 mm	5 – 30
Inlet Diameter	8 mm	4 – 15
Outlet Diameter	10 mm	4 – 15
Outlet Boss Diameter	18 mm	10 – 30
Outlet Length	15 mm	8 – 30
Outlet Height	20 mm	5 – 40
Cover Thickness	5 mm	3 – 10
Bolt Count	6 mm	4 – 12
Bolt Hole Diameter	3 mm	2 – 6
Bolt Circle Diameter	44 mm	30 – 70
Impeller OD	35 mm	20 – 50
Blade Height	8 mm	4 – 15
Blade Count	5 mm	3 – 8
Blade Thickness	2 mm	1 – 4
Hub Diameter	12 mm	8 – 20
Shaft Diameter	6 mm	4 – 12
Maglev Stator Inner Diameter	8 mm	5 – 15
Maglev Stator Outer Diameter	26 mm	15 – 35
Maglev Stator Height	5 mm	2 – 10
Maglev Rotor Inner Diameter	5.5 mm	4 – 10
Maglev Rotor Outer Diameter	12 mm	8 – 20
Maglev Rotor Height	4 mm	2 – 10
Maglev Air Gap	0.5 mm	0.2 – 3

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS