Everything else
M12 4-Pin Shielded Twisted-Pair Cable 400 mm
- Bounding box
- 400 × 16 × 16 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
生成一根导线,内有4根线,红黑黄绿,均为24号线,其中红黑双绞,黄绿双绞,两组双绞线平行放置,在外面增加编织屏蔽层,屏蔽层外面是外被,外被符合TUV要求。线的一端为M12工业4pin公头,线序为1红2黑3黄4绿,另一端为裸线。线总长400mm。绘制图纸。
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length, bare end to connector tip | 400 mm | 100 – 1000 |
| 24 AWG insulated wire diameter | 1.1 mm | 0.8 – 2 |
| Twisted-pair lay length | 20 mm | 8 – 60 |
| Pair centre offset from cable axis | 1.1 mm | 0.8 – 3 |
| Braid shield inner diameter | 4.8 mm | 3 – 12 |
| Braid shield thickness | 0.3 mm | 0.2 – 1 |
| Outer jacket wall, TUV >= 1.0 | 1.1 mm | 1 – 3 |
| Jacket shrink onto shield | 0.1 mm | 0 – 1 |
| Exposed twisted pairs at bare end | 18 mm | 5 – 80 |
| Exposed braid length | 12 mm | 3 – 60 |
| Connector body diameter | 16 mm | 10 – 30 |
| Connector body length | 44 mm | 20 – 80 |
| Threaded barrel diameter | 12 mm | 8 – 20 |
| Threaded barrel length | 8 mm | 4 – 20 |
| Strain-relief boot length | 20 mm | 6 – 50 |
| Contact pin diameter | 1 mm | 0.6 – 3 |
| Contact pin spacing | 2.5 mm | 1.5 – 6 |
| Contact pin length | 3 mm | 1 – 8 |
| Cutaway window start from bare end | 120 mm | 0 – 400 |
| Cutaway window length | 140 mm | 0 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
DC 24V DALI SLIM LED Sürücü Gövdesi (360 mm)
BU REFERANSA GÖRE REVİZE ET
