LUMA Motion Waistband Clip V1 Assembled Dovetail Connection

I already have a CAD prototype for LUMA Motion Clip V1. Use the attached CAD files as the starting geometry. Do NOT redesign the basic clip. The design is: - Clip: 60 mm wide × 45 mm tall × 6.5 mm thick - Two vertical female dovetail channels in the clip - Channels open at the TOP - Two matching male dovetail rails - Rails slide DOWN into the channels - Rails are mechanically captured by the dovetail undercut - 35 mm active rail length - ~7 mm maximum rail-head width - ~4 mm rail projection - 32 mm rail center-to-center spacing - 0.20 mm initial sliding clearance - Solid bottom stop FIRST TASK: Import/inspect the supplied CAD and preserve the existing dimensions and two-rail layout. Do not add the safety catch, release button, magnets, pouch, or waistband yet. I only want you to verify and refine the CORE TWO-RAIL DOVETAIL CONNECTION so that: 1. Both rails enter from the top. 2. Both rails slide downward. 3. The wider rail heads are captured behind the channel lips. 4. The rails cannot pull straight away from the clip. 5. Both rails reach a definite bottom stop. Provide an assembled view and a cross-section proving the dovetail engagement. This is a functional 3D-printable prototype, not a visual approximation.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.