Brackets and mounts
LoRa Node Enclosure Frame
- Bounding box
- 176.0 × 160.0 × 200.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- October 12, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable mechanical enclosure frame for an outdoor LoRa electronics node. The design should resemble a sturdy throne-like frame, not a chair. Geometry: - Two vertical side supports, one on the left and one on the right. - Each side support has an L-shaped profile. - A horizontal bridge connects both supports at the top. - The bottom section contains two side-by-side horizontal battery compartments, with the batteries lying flat. - The main circuit board will be mounted vertically. - A small solar charge controller will be mounted inside the upper connecting bridge. Design requirements: - Clean, attractive industrial design with rounded external edges. - Flat mounting surfaces and simple geometry suitable for FDM 3D printing. - Use separate components where practical. - Do not add decorative screws, random holes, or unrelated mechanical parts. - Do not invent internal dimensions for electronic components. - For this first version, create only the external frame and approximate component spaces. Keep the design easy to modify later.
Parameters
| Name | Value | Range |
|---|---|---|
| Inner span between supports | 160 mm | 120 – 240 |
| Support height | 180 mm | 120 – 300 |
| Support depth | 80 mm | 40 – 160 |
| Support thickness | 8 mm | 3 – 20 |
| Support foot inward length | 20 mm | 10 – 60 |
| Top bridge height | 20 mm | 5 – 50 |
| Support fillet radius | 4 mm | 0 – 6 |
| Top bridge fillet radius | 3 mm | 0 – 5 |
| Battery compartment length | 80 mm | 40 – 120 |
| Battery compartment width | 60 mm | 30 – 100 |
| Battery compartment height | 30 mm | 15 – 60 |
| Battery wall thickness | 3 mm | 1.5 – 8 |
| Battery left/right gap | 0 mm | 0 – 20 |
| Battery fillet radius | 2 mm | 0 – 4 |
| PCB bracket width | 80 mm | 30 – 160 |
| PCB bracket height | 100 mm | 40 – 200 |
| PCB bracket thickness | 5 mm | 2 – 12 |
| PCB bracket bottom offset | 30 mm | 0 – 160 |
| PCB bracket fillet radius | 3 mm | 0 – 5 |
| Solar shelf width | 70 mm | 30 – 120 |
| Solar shelf depth | 50 mm | 20 – 80 |
| Solar shelf thickness | 5 mm | 2 – 12 |
| Solar lip height | 10 mm | 3 – 30 |
| Solar shelf bottom offset | 150 mm | 40 – 200 |
| Solar bracket fillet radius | 2 mm | 0 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu